ugh wait!!! cant wait!!! lol!

anyway I was looking for some suggestions on exhausts.

All of the greddy and apexi ect ect are a bit smaller than 2.5" ... would it be better to get actual 2.5" piping and then get a muffler for it?

I have a jdm type r engine and plan on getting cams (skunk2 stage 2 or BC spec 4)

 

why not smsp exhaust?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by El Pollo Diablo &raquo;</TD></TR><TR><TD CLASS="quote">why not smsp exhaust?</TD></TR></TABLE>

Exactly what I was thinking.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by El Pollo Diablo &raquo;</TD></TR><TR><TD CLASS="quote">why not smsp exhaust?</TD></TR></TABLE>

Ummm ... same here.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1GreyTeg &raquo;</TD></TR><TR><TD CLASS="quote">

Exactly what I was thinking.</TD></TR></TABLE>

+1

 

HAHAHA LMAO!!!

 

gad damn, f00s....get off my coatails!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by steves98itr247 &raquo;</TD></TR><TR><TD CLASS="quote">

+1</TD></TR></TABLE>

+3904823767204823423

otherwise i just ordered one from hytech this week. bolt on vs. smsp's which requires some work to be put together. john's been awesome too, today he told me everything's done, he's just waiting for my header so that he can ensure 100% correct fitment for length. for hytech

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by El Pollo Diablo &raquo;</TD></TR><TR><TD CLASS="quote">gad damn, f00s....get off my coatails!</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bbasso &raquo;</TD></TR><TR><TD CLASS="quote">HAHAHA LMAO!!!</TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bbasso &raquo;</TD></TR><TR><TD CLASS="quote">Matt's always right</TD></TR></TABLE>

 

Who said that???

:looks around room for long lost twin brother:

 

I &lt;3 my SMSP header and exhaust

 

kteller piping and a magnaflow.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by penpen &raquo;</TD></TR><TR><TD CLASS="quote">+3904823767204823423

otherwise i just ordered one from hytech this week. bolt on vs. smsp's which requires some work to be put together. john's been awesome too, today he told me everything's done, he's just waiting for my header so that he can ensure 100% correct fitment for length. for hytech</TD></TR></TABLE>

Heh, if you think the Hytech is perfect... yeah... My roomie could vouch for it not being exactly perfect. Hangers busting multiple times... i myself had to dremel out the wideband holes since they were left too small. Lots of little things... and it is NOT as quiet as everyone says

Being said... for cost and quality... go with a kteller setup.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by splitime &raquo;</TD></TR><TR><TD CLASS="quote">and it is NOT as quiet as everyone says </TD></TR></TABLE>

Do you have a sound clip of the Hytech at WOT with a test pipe and header please?

As for the rest of it ... I'm suprised to hear that. Any explanation for the failure of the hangars? Pics? Please tell us more.

 

if u want quite one..check out AJR SPL street muffler with b-pipe

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by splitime &raquo;</TD></TR><TR><TD CLASS="quote">Heh, if you think the Hytech is perfect... yeah... My roomie could vouch for it not being exactly perfect. Hangers busting multiple times... i myself had to dremel out the wideband holes since they were left too small. Lots of little things... and it is NOT as quiet as everyone says

Being said... for cost and quality... go with a kteller setup.</TD></TR></TABLE>

how long ago did he get it? they've been making these for years now so i'm sure they've worked out a lot of bugs 'n glitches. i've only heard good things about it though.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by penpen &raquo;</TD></TR><TR><TD CLASS="quote">how long ago did he get it? they've been making these for years now so i'm sure they've worked out a lot of bugs 'n glitches. i've only heard good things about it though.</TD></TR></TABLE>

Hum, its been on since the end of summer i think.

 

i have an smsp.. but have a different exhaust yet to come

 

yeah, I was thinking about getting his exhaust also. All he sells is magnaflow. I havent really heard of anyone using them... I am used to hearing the rice brands!

I want something that isnt going to look totally retarted like a big potatoe shooter (like I have now!) I want something clean and that fits right with the stock bumper.

 

Magnaflow is an old company thats been used on domestics forever. There are lots of reviews on the kteller stuff..... you just haven't search very hard have you.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bdb &raquo;</TD></TR><TR><TD CLASS="quote">kteller piping and a magnaflow.</TD></TR></TABLE>

good choice IM0

 

no I have, but I havent heard many people using them for imports

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dnatrance &raquo;</TD></TR><TR><TD CLASS="quote">no I have, but I havent heard many people using them for imports</TD></TR></TABLE>

i know of many...and very happy with the performance, sound, etc...

 

hmmm..... I dont see that magnaflow has any mufflers that have 2.5" inlets, well at least one with a tip