FS: Custom H22/EG Turbo Kit - Quality stuff, low miles
Thread Starter
Junior Member
Joined: Oct 2002
Posts: 948
Likes: 0
From: Batavia, IL, USA
FS: Custom H22/EG Turbo Kit - Quality stuff, low miles
Ok guys... this is another one of those project that just barely got finished and now its being parted out 
Didnt want it to come to this but I dont have the time/money to keep this project top notch.
I am located in Chicago if anyone local wanted to do a pickup, and I also have a truck and will drive up to 90 minutes away to meet a buyer somewhere if you would like to purchase in person.
I am selling this turbo kit, which the buyer will be excellently pleased with the quality in it. It was built to be a reliable street car setup and make good power on pump gas... and that it did. Never even finished the tuning but got 416fwhp at 16psi on 93 octane... I think there was more in it.
This entire setup has less then 1000 miles on it. It was tuned to where it was, then driven on the street for 3 nights. Guys... if your looking for a turbo kit that makes 400+ HP for your H22 EG or Teg.. I promise you that you will love this setup... this is not some POS tossed together turbo kit, everything is the finest materials and quality... this is one trick *** setup to build one MEAN car.
I am going to itemize how much I want for each component of the kit:
These first items are not seperarable, everything is under 1000 miles.
Custom full stainless Thickwall Exhaust manifold. Thick flanges and thick wall pipe, tig welded. The flange is port matched on one side and tapers within the flange to match the pipe on the outside. I want $450 for it.
Tial 46mm Wastegate, red cap Obviously a top of the line wastegate... large size, I was able to run boost as low as 9.5psi and never had any creep issues with this wastegate on this manifold. New they are around $500, I want $400.
Precision SC61 Turbo, T04E Compressor Housing This turbo is capable of well over 500fwhp. I made 416fwhp on pump gas. New they are around $900 I want $750.
Oil Feed Line -4 SS Braided, Lengthened to reach the oil filter area. Includes -4 to 1/8 BSPT Fitting to run off a "T" for your oil pressure sensor or into an oil filter spacer with output. $50
3" V-Band Thickwall (.065) Stainless Downpipe with 3 O2 bungs and V-Band Adapter for the turbo[B] Very nice piece and easy worth $275
So those are the parts that I will not seperate... that leaves you with a total cost of $1925 + shipping for an awesome turbo system. Here are some pics and then I will list the optional parts with prices I will only sell for to the buyer of the turbo kit.
OPTIONAL PARTS:
Greddy Intercooler, The large one, its about twice as tall as what you can see thru the bumper $650
Stock Oil Pan modified for oil return line and -10 Oil return line. $50
Charge Pipes from Turbo to Intercooler and Intercooler to Throttle Body. Setup for Tial BOV (The picture was before we added the BOV, its location goes on the other side of the pipe by the Coil mounted to my wheel-well) with Hose Couplers and T-Bolt clamps where all visable clamps are $250
Tial BOV - Polished $175
Full 3" .065 Wall thickness Stainless Exhaust with Flex Section... this system fits awesome and is setup to PERFORM... it is VERY LOUD there are no mufflers or resonators... you could add one if you like because the car sounds like a dragster with this, you can hear every rotation of the turbo. $500
Thanks for looking!!!
-Charles
Didnt want it to come to this but I dont have the time/money to keep this project top notch.I am located in Chicago if anyone local wanted to do a pickup, and I also have a truck and will drive up to 90 minutes away to meet a buyer somewhere if you would like to purchase in person.
I am selling this turbo kit, which the buyer will be excellently pleased with the quality in it. It was built to be a reliable street car setup and make good power on pump gas... and that it did. Never even finished the tuning but got 416fwhp at 16psi on 93 octane... I think there was more in it.
This entire setup has less then 1000 miles on it. It was tuned to where it was, then driven on the street for 3 nights. Guys... if your looking for a turbo kit that makes 400+ HP for your H22 EG or Teg.. I promise you that you will love this setup... this is not some POS tossed together turbo kit, everything is the finest materials and quality... this is one trick *** setup to build one MEAN car.
I am going to itemize how much I want for each component of the kit:
These first items are not seperarable, everything is under 1000 miles.
Custom full stainless Thickwall Exhaust manifold. Thick flanges and thick wall pipe, tig welded. The flange is port matched on one side and tapers within the flange to match the pipe on the outside. I want $450 for it.
Tial 46mm Wastegate, red cap Obviously a top of the line wastegate... large size, I was able to run boost as low as 9.5psi and never had any creep issues with this wastegate on this manifold. New they are around $500, I want $400.
Precision SC61 Turbo, T04E Compressor Housing This turbo is capable of well over 500fwhp. I made 416fwhp on pump gas. New they are around $900 I want $750.
Oil Feed Line -4 SS Braided, Lengthened to reach the oil filter area. Includes -4 to 1/8 BSPT Fitting to run off a "T" for your oil pressure sensor or into an oil filter spacer with output. $50
3" V-Band Thickwall (.065) Stainless Downpipe with 3 O2 bungs and V-Band Adapter for the turbo[B] Very nice piece and easy worth $275
So those are the parts that I will not seperate... that leaves you with a total cost of $1925 + shipping for an awesome turbo system. Here are some pics and then I will list the optional parts with prices I will only sell for to the buyer of the turbo kit.
OPTIONAL PARTS:
Greddy Intercooler, The large one, its about twice as tall as what you can see thru the bumper $650
Stock Oil Pan modified for oil return line and -10 Oil return line. $50
Charge Pipes from Turbo to Intercooler and Intercooler to Throttle Body. Setup for Tial BOV (The picture was before we added the BOV, its location goes on the other side of the pipe by the Coil mounted to my wheel-well) with Hose Couplers and T-Bolt clamps where all visable clamps are $250
Tial BOV - Polished $175
Full 3" .065 Wall thickness Stainless Exhaust with Flex Section... this system fits awesome and is setup to PERFORM... it is VERY LOUD there are no mufflers or resonators... you could add one if you like because the car sounds like a dragster with this, you can hear every rotation of the turbo. $500
Thanks for looking!!!
-Charles
Joined: Sep 2003
Posts: 2,385
Likes: 0
From: IV/SD,, CA
Re: (mister2racer)
good looking system. I may be interested in some parts like manifold, turbo, down pipe, oil pan and charge piping.....can you some more pics of those specific items items to h22_hatch@yahoo.com Big pics if you have them 
Im in california so only interested in the items that can be shipped
Im in california so only interested in the items that can be shipped
Thread Starter
Junior Member
Joined: Oct 2002
Posts: 948
Likes: 0
From: Batavia, IL, USA
thanks... email sent!!!
currently still for sale!!!
anyone looking for a turbo kit for H22 in a EG or Teg this is the answer!!! you will love the quality and big power... on the built motor 9:1 compression and stock JDM cams it made 415 on pump gas at 15-16 psi and it made roughly 365 at friggen wastegate level 9.5 psi!!!! thats an mid-low 12 second car with the boost controller turned off!!!
currently still for sale!!!
anyone looking for a turbo kit for H22 in a EG or Teg this is the answer!!! you will love the quality and big power... on the built motor 9:1 compression and stock JDM cams it made 415 on pump gas at 15-16 psi and it made roughly 365 at friggen wastegate level 9.5 psi!!!! thats an mid-low 12 second car with the boost controller turned off!!!
Trending Topics
Senior Member
Joined: Nov 2003
Posts: 5,167
Likes: 1
From: baxter, tn, usa
Re: (mister2racer)
whats up man? we were talking about the dp and exhaust,i was offering what you ask for,and you told me you would take care of the shipping,not a good way to do a serious buyer,but oh well? good luck on your sale. 
Thread Starter
Junior Member
Joined: Oct 2002
Posts: 948
Likes: 0
From: Batavia, IL, USA
Re: FS: Custom H22/EG Turbo Kit - Quality stuff, low miles (1SICJDM)
Sorry I dont... what kind of shot would you like I can possibly take one for you??
What you can see in the 2 pics really is what it consists of. Between those 2 pics its just straight run of 3" pipe. Let me know what you need.
I do have the original of those 2 pics before making them smaller if you want just larger ones of what i got then PM me your email address.
What you can see in the 2 pics really is what it consists of. Between those 2 pics its just straight run of 3" pipe. Let me know what you need.
I do have the original of those 2 pics before making them smaller if you want just larger ones of what i got then PM me your email address.