is there anyone out there interested in a group buy for b16/b18 blocks for golden eagle sleeving? Vince told me if I could 6 blocks together (so only need 5 people cause I am sleeving my block) that they will drop the price to $585 per block. The catch is the check has to come from one person, and all shipped from one place, and they ship it all back to one place. If 5 people wanted to do this, I would gladly be the person to do the shipping/etc in order to get this group buy price. I live in Nor Cal so LA is only about a 5-6 hour drive for me. I have a pickup truck that could probably fit all of the blocks. The payment would have to be up front however, so you'd have to put some trust in me.....but I have tons of resources and an e-bay feedback of 30+ with no negatives (iqofone is the name)..... if anyone is interested post here with your e-mail and I'll contact you, or you can contact me at immy@attbi.com or 925-462-3390 ask for Kurt. I work from 8 to 5-6pm on weekdays but I dont work weekends. Lemme know if 5 people out there want to get on the $585 per block price.

 

You may want to double check that price with Vince. I believe the last person who put a group buy together found out the 585 is just for the 6th block, not all of them. The pricing structure is on a sliding scale, thus each block gets a little cheaper than the last until you hit the lowest price.

 

thats directly from vince

 

Apparently they change their pricing when all the blocks are sent in at one time, from one person, the pricing structure changes. I'm currently $140 in the hole because people didn't follow through on my groupbuy. There are still 2 slots open @ $685 (vs. $767 normally from GE, including tax) if anyone is interested.
If anyone is near Rochester, NY, I can do even better.

Thanks
Ben

 

I am def interested and I can get two more..all from the DFW are in texas...
so if the two are a go, then you have three from texas...

please finalized, and get back to me'


stan

 

Just so you guys know, I already have six blocks here in VA Bch to ship. If you want to get in with me, let me know. I will be shipping them before the end of the month, but I can always get the lowest price because I sent six at once. Hit me up on my home email that is located on my profile. $585 for B-Series and $644 for an H-series. You will have to cover shipping. Golden Eagle will also bore and hone your block to your pistons for another $125. I can also get pricing on a couple of other items, but I will only do those through my email.

 

problem is i'm already in cali and i was going to drive my block down. why would i want to ship it over to you then have it shipped back to cali then from golden eagle back to you then you back to cali :/

i have a pickup truck which can fit all 6 blocks and i'm 5-6 hours drive away...

 

You don't have to ship it to me, you can drive it up, but the payment has to be sent through me. I was just trying to help you out if you can't get your six

Anytime after I ship my blocks, I will be able to get those prices. You can tell I am not trying to make a dime on this either. Just trying to help a fellow H-T member out.

 

I am ready to sleeve my other b16a block. I would be interested in doing this groupbuy if the price per block is 585.00. Please let me know at Evansjs@fast.net. Doesnt matter who I send it too as long as it is that price.

Thanks, Jeff

 

will this happen as soon as there are 6? Hmm I was going to do this but didn't plan on doing it this soon.... I am however interested. I am in texas and can probably drop of the block in DFW, perhaps saving some in shipping....

 

well I might have three blocks ready to go here in DFW...with you, it'll make it a fourth one...

then we can ship it by truck and get a discounted shipping..(200lbs and up)

 

well if i can get the 3 from flamenco, then there is mine, if shingles and you get in, thats 6. i'm ready to do it this next week.

call me 925-462-3390 if you are seriously interested.

also someone called me on the phone from san francisco i'm not sure who it was, but they seemed interested but i dont know how long til he could get it done.




[Modified by immortal, 9:40 PM 1/15/2002]

 

shingles: contact me, I'l try get thw other two going as welll

stan

AIM adhi77

 

also just to let people know i'm not making any profit off of this. the money i save me and you guys is the profit for all of us

 

I want in, but damn, this is kinda early....I just spent about 3500 bucks on the snap-on truck...

 

That damn snap on truck, why do they have to have so many cool toys...er...tools!

Well, immortal is sounds like you got your six, it took me a lot longer to gather them all at once. And Jeff I will be emailing you.

 

gsr*lude: I'm in MD, so shipping to your location is no biggie for me. I'm definitely interested. I sent you an email, so could you send me some details about the "group buy" you have going on. Thanks.

 

don't quite have six yet. i think FOUR are for sure and there are like three maybes...

 

I just sent you an email, I'm interested.

Greg

 

dammit, anybody wanna do this in the summer? I'll have one for sure and one maybe (b18) MD/DC/VA

 

If you want to do it in the summer just hit me up, I will always be able to get you the low prices. I am at work now, but I will answer all emails when I get home.

 

yeah i need some time to save up to get a block

 

i got a h22 that needs to make it down there, GE is about 2 hours max from my house
i got the 644 someone let me know more details on this. maybe i can help since i live so close. plus someone has to watch them they screw up alot, ALOT
they are infamous for forgetting to do stuff but the quality is best


[Modified by forcefed, 10:25 PM 1/16/2002]

 

I am ready to get my block sleeved. Let me know whats going on please, you can e-mail me at bullockjri@aol.com....I have money and I am waiting! Later!

 

Immortal, you might want to hit these guys up to get your six. If not, I will help them out.