K-Powered 1320 EG - Slowly but surely
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 3,184
Likes: 0
From: Alpharetta, GA
K-Powered 1320 EG - Slowly but surely
Interior (not much change):
Under the Hood: (Slowly, but surely)
(Rad has been removed since this pic, only the motor and trans are left.)
Just ordered:
Wilwood Civic/Integra - 262mm OE Disc (This kit is a medium duty drag race kit with .35" thick solid steel rotor.)
Stainless lines
Agressive Pads
Prop Valve(s) (Checking on the necessity of these)
'94 ABS Spindles (for the kit)
'92 Civic Si Brake Master Cylinder
Next:
Suspension
K20A2
Base RSX Trans (sitting in my garage) Quaife, Clutch and flywheel (TBD)
I sold a few options from work and that check arrives on the 7th. I go on a cruise on the 11th and I'm back on the 14th. I may try to coordinate the delivery of everything for after that. Getting much closer.
Under the Hood: (Slowly, but surely)
(Rad has been removed since this pic, only the motor and trans are left.)
Just ordered:
Wilwood Civic/Integra - 262mm OE Disc (This kit is a medium duty drag race kit with .35" thick solid steel rotor.)
Stainless lines
Agressive Pads
Prop Valve(s) (Checking on the necessity of these)
'94 ABS Spindles (for the kit)
'92 Civic Si Brake Master Cylinder
Next:
Suspension
K20A2
Base RSX Trans (sitting in my garage) Quaife, Clutch and flywheel (TBD)
I sold a few options from work and that check arrives on the 7th. I go on a cruise on the 11th and I'm back on the 14th. I may try to coordinate the delivery of everything for after that. Getting much closer.
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 3,184
Likes: 0
From: Alpharetta, GA
Re: K-Powered 1320 EG - Slowly but surely (I eat Pho)
I know, I need to get some dry ice and do that this weekend. Just need to get the time. I normally only get about 30 to 45 mins a night (after I get home from work).
Once the tar is up and the last of the heater core is out, I'll be prepping the interior for paint. (Taping stuff off, masking, etc...)
The motor is all that's left since I took the rad out last night. I'm hoping to pull that in a few weeks. (I have a cruise next weekend and helping my sister move the following...priorties are sucking right now.
)
Motor will arrive when I get back from my cruise on the 14th. (At least that's what I'm planning, I have to work that out with the seller.) Then the head comes off and goes out for P&P, new valvetrain, and IPS cams.
Steve
Once the tar is up and the last of the heater core is out, I'll be prepping the interior for paint. (Taping stuff off, masking, etc...)
The motor is all that's left since I took the rad out last night. I'm hoping to pull that in a few weeks. (I have a cruise next weekend and helping my sister move the following...priorties are sucking right now.
)Motor will arrive when I get back from my cruise on the 14th. (At least that's what I'm planning, I have to work that out with the seller.) Then the head comes off and goes out for P&P, new valvetrain, and IPS cams.
Steve
Honda-Tech Member
Joined: Sep 2002
Posts: 2,709
Likes: 0
From: Alabama
Re: K-Powered 1320 EG - Slowly but surely (k-series)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VR »</TD></TR><TR><TD CLASS="quote">Nice...now get that k series in .
</TD></TR></TABLE>
</TD></TR></TABLE>
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 3,184
Likes: 0
From: Alpharetta, GA
Re: K-Powered 1320 EG - Slowly but surely (ki3t)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ki3t »</TD></TR><TR><TD CLASS="quote">K's are slow. 
</TD></TR></TABLE>
</TD></TR></TABLE>
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 3,184
Likes: 0
From: Alpharetta, GA
Re: K-Powered 1320 EG - Slowly but surely (I eat Pho)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I eat Pho »</TD></TR><TR><TD CLASS="quote">how about sond deadening removal for the interior? </TD></TR></TABLE>
99% of the tar/sound deadening stuff is out. I have to do clean up on the adhesive and caulk still, but it's basically done. Pics will be posted shortly.
Steve
</TD></TR></TABLE>99% of the tar/sound deadening stuff is out. I have to do clean up on the adhesive and caulk still, but it's basically done. Pics will be posted shortly.
Steve
Honda-Tech Member
Joined: Oct 2002
Posts: 2,411
Likes: 0
From: MD
Re: K-Powered 1320 EG - Slowly but surely (VR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VR »</TD></TR><TR><TD CLASS="quote">Nice...now get that k series in .
</TD></TR></TABLE>
. </TD></TR></TABLE>
Honda-Tech Member
Joined: Nov 2002
Posts: 2,714
Likes: 0
From: Fairfax, CA
Re: K-Powered 1320 EG - Slowly but surely (VR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VR »</TD></TR><TR><TD CLASS="quote">Nice...now get that k series in .
</TD></TR></TABLE>
. </TD></TR></TABLE>
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 3,184
Likes: 0
From: Alpharetta, GA
Re: K-Powered 1320 EG - Slowly but surely (VR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VR »</TD></TR><TR><TD CLASS="quote">Nice...now get that k series in .
</TD></TR></TABLE>
BTW - Spoke to the guy I'm getting my motor from. Gave him the items I do and don't need and he's on the look out (he owns a salavage yard and hits the auctions all the time). I should be ordering the motor next week and it should be arriving the week of the 14th.
K20A2 with no header, harness, intake or trans.
Steve
. </TD></TR></TABLE>BTW - Spoke to the guy I'm getting my motor from. Gave him the items I do and don't need and he's on the look out (he owns a salavage yard and hits the auctions all the time). I should be ordering the motor next week and it should be arriving the week of the 14th.
K20A2 with no header, harness, intake or trans.
Steve
Member
Joined: Apr 2004
Posts: 1,782
Likes: 0
Re: (ea_b16hatchie)
I want a K20....
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ea_b16hatchie »</TD></TR><TR><TD CLASS="quote">good work so far</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ea_b16hatchie »</TD></TR><TR><TD CLASS="quote">good work so far</TD></TR></TABLE>
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 3,184
Likes: 0
From: Alpharetta, GA
Re: (Archidictus)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Archidictus »</TD></TR><TR><TD CLASS="quote">Speaker bracket holders are still in there .</TD></TR></TABLE>
I know, I just noticed it earlier today. I'll get them out eventually.
Steve
.</TD></TR></TABLE>I know, I just noticed it earlier today. I'll get them out eventually.
Steve
* B A N N E D *
Joined: Jan 2005
Posts: 6,907
Likes: 0
From: Where all the TRY HARDS STUNT all day, CA
Re: K-Powered 1320 EG - Slowly but surely (k-series)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by k-series »</TD></TR><TR><TD CLASS="quote">
99% of the tar/sound deadening stuff is out. I have to do clean up on the adhesive and caulk still, but it's basically done. Pics will be posted shortly.
Steve</TD></TR></TABLE>
Looks awesome. any paint?
99% of the tar/sound deadening stuff is out. I have to do clean up on the adhesive and caulk still, but it's basically done. Pics will be posted shortly.
Steve</TD></TR></TABLE>
Looks awesome. any paint?
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 3,184
Likes: 0
From: Alpharetta, GA
Re: K-Powered 1320 EG - Slowly but surely (SOY BEAN!!!)
Once I find someone to do my cage, I'll have it done Nighthawk Black Pearl. I know, not too flashy, but I'll leave the flash for under the hood.
Steve
Steve