Hi guys,

I saw this pic posted by B16 grenade in the FI forums, and after looking at it I realized that my PCV lines aren't the same. When I bought my stuff from Sunnyvalle Acura I only bought the nipple thingy that goes into the vacuum tank and then I connected that to my IM with a breather hose (#2, 3, & 7). I'm guessing that this is not the correct way to hook it up?

I think I need that section of hose with the valve looking thing in the middle of the hose, and the 90 degree elbow. On the pics it is #4 and $6 is that correct?

http://www.we-todd-did-racing....D.jpg

Thanks

 

bump...

where's all the CA B18C owners at?

 

yeah, when I did my swap I bought all that in the pic from Marin Acura. you def need #6 as that is the pcv valve.

 

cool, thanks

I gotta check and see if I bought #6 or if I bought #3. I bought one of those but I cant remember which one. It might be #6 which looks like the correct part number. That pic from WTDR must be of a ITR or B16, because the GSR diagram looks different on Sunnyside Acura.

 

cool, let me know if you got any more questions on it.