YO

Ok i am in the process in building up a d16a6 with all internals. I got all my parts gathered up such as pistons, JRSC, header, etc... Now i am having trouble on finding rods. I have Nippon Racing turbo Pistons P28 (cast) 75.5 bore. Now what rods shoudl i use to fit, the wrist pin sizes are different than the stock rods. I need rods with the same dimensions that will work with the P28 pistons. Now from what i remeber i can use B-serie rods and just grind(notch) the bottom of the sleeve so the rods wont scrape the edges due to the beefy size. Which other rods will work for this combinations and please be specific. And remeber i am going aftermarket rods.

Give me the best solutions.