hey guys, my friend has a 91 hatch, and he is going with a first gen. b16 block, and a 00 Si head......he has an OBD-0 ecu, (i think p30, not sure though).....the thing is he wants to keep it OBD-0,...so what dizzy should he use, and does he need an OBD-2 to OBD-0 conversion harness for it to work???.....please help my friend out and like make a list of the necessory parts needed for this to work OBD-0....

thanks guys

 

I'm not sure but you think just because it's an 00 Si head there's gonna be issues? All he has to do is throw the obd0 dizzy on there. p30 is an obd1 ecu, so he's gonna have to replace that too.

 

oh yea....can you use a single cam dizzy on a dual cam??.....

 

no, you would need a b16a1 dizzy...

 

i would need a first gen dizzy on the 2000 Si head?? is this right???

sorry for the gay questions..

 

Yes, it is the same head as the OBD-0 or B16A head, just with minor refinements over ten years of production.

 

thanks bro!

 

you need first gen b16 dizzy obdo off a 88-91 jdm b16

 

1st
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tdocrx &raquo;</TD></TR><TR><TD CLASS="quote">no, you would need a b16a1 dizzy...</TD></TR></TABLE>

2nd
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 90-RED-SI &raquo;</TD></TR><TR><TD CLASS="quote">you need first gen b16 dizzy obdo off a 88-91 jdm b16 </TD></TR></TABLE>

Thank you for regurgitating