FS: B18C GSR swap..........................................B16 tranny w/OEM LSD
Motor is in clean/excellent condition and runs strong...no doubt!
- B18C JDM GSR block (stock untouched)
- JDM Y21 (4.4 FD)tranny w/OEM LSD (NO grinds)(Same GEARING as USDM Type R)
-Matching B18C head
-Mild headwork (port matched and proper refinishing of the ports)
-Head milled(0.015") to bump compression to 11:1
-Supertech valvesprings/retainers
-Set of GSR cams and 99 SI cams included
-Skunk2 Intake Manifold
-Bored GSR throttlebody(64mm)
-Honda N1 underdrive pully
-ACT Prolite 8lb. Flywheel
-B&M FPR
-Clutch Specialties FullFace Clutch (1500 miles)
-All axles
-Wire harness
-Delsol dual core radiator
Located in Charleston S.Carolina prefer pickup....
Looking for $3500
Look at the pics in my sig......
http://pg.photos.yahoo.com/ph/...0.jpg
Modified by blazin at 6:13 PM 2/8/2005
- B18C JDM GSR block (stock untouched)
- JDM Y21 (4.4 FD)tranny w/OEM LSD (NO grinds)(Same GEARING as USDM Type R)
-Matching B18C head
-Mild headwork (port matched and proper refinishing of the ports)
-Head milled(0.015") to bump compression to 11:1
-Supertech valvesprings/retainers
-Set of GSR cams and 99 SI cams included
-Skunk2 Intake Manifold
-Bored GSR throttlebody(64mm)
-Honda N1 underdrive pully
-ACT Prolite 8lb. Flywheel
-B&M FPR
-Clutch Specialties FullFace Clutch (1500 miles)
-All axles
-Wire harness
-Delsol dual core radiator
Located in Charleston S.Carolina prefer pickup....
Looking for $3500
Look at the pics in my sig......
http://pg.photos.yahoo.com/ph/...0.jpg
Modified by blazin at 6:13 PM 2/8/2005



make an eg chassis hit 13's for sure