I have a Turbonetics t3/t04e with a suposed Stg3 wheel on it but the 2 stg3 housings i have (.82 and .63ar) leave a gap between the wheel and the housing. It's not big, maybe 2mm but every picture i see on the net has the wheel right next to the housing.
Also the in/exducer sizes aren't matching up on my little chart i found.

Inducer: 53.91mm
Exducer: 64.94mm

anyone have some insight?

 

here are some pix both are stg3 housings:

.82ar housing


.63ar housing

 

THAT'S A lot of gap in my opinion and would probably lead to alot of lag..

 

My stage 3 .63 turbine.

 

so does anyone know what stage wheel this is?

stage2 maybe?

 

Probably.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by J. Davis &raquo;</TD></TR><TR><TD CLASS="quote">Probably.

</TD></TR></TABLE>

why aren't you ever on aim anymore

 

bump

 

Thats a Stage II wheel (by Turbonetic's calculations, and if your measurements are right). You'll need a smaller back housing for it

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rtmiami &raquo;</TD></TR><TR><TD CLASS="quote">Thats a Stage II wheel (by Turbonetic's calculations, and if your measurements are right). You'll need a smaller back housing for it </TD></TR></TABLE>

crap; oh well; someone wanna trade me a .63 stg3 housing for a stg2 one