95 Integra GSR Sedan db8 parts for sale
Thread Starter
Honda-Tech Member
iTrader: (3)
Joined: Jan 2002
Posts: 2,456
Likes: 0
From: Albuquerque, United States of America
Alright, anything and everything (almost) is for sale out of my db8. The exterior parts are gone except for the rear bumper and rear lights (all red). The headlights and passenger side turn signal are sold, I still have the driverside turn signal, painted orange with knicks from rocks. I took the radio out and the shifter is sold.
The interior is in good shape, it's dark leather. The sale of the front and rear seats are pending. Anyways, the seats have the normal wear and tear from being used. The driver side seat has wear on the bolsters from getting in and out. The passenger side is in pretty good shape. The rears are in good shape as well. 350 obo - pending
Interior paneling is in pretty good shape, wear and tear from people hitting the panels, stuff flying around in the cabin, small children, etc. etc. 200 obo
Center console has a hole for an alarm light as well as a slot (really ghetto, that's the way I bought it) for a switch that was taken out ... make an offer?
That's the stuff I have out or can get out in a timely fashion. If you need anything, hit me up on the pm's here or AIM: onicamber. Thanks
Engine was just rebuilt 15k miles ago, SRP pistons, Ferrea stainless steel exhaust valves, mild head work, tranny is good, no grinds, ACT HDSS clutch, fidanza 7 pound flywheel, stock axles. Once I take it out of the car, it'll be up for sale, probably ~4k for the whole swap?
Suspension techniques sway bars front and rear. Cobalt friction GT sports brake pads for stock gsr brakes. I won't take the brakes off until everything else is gone or off the car.
I don't have a vouch list, yet, but I'm working on it
The interior is in good shape, it's dark leather. The sale of the front and rear seats are pending. Anyways, the seats have the normal wear and tear from being used. The driver side seat has wear on the bolsters from getting in and out. The passenger side is in pretty good shape. The rears are in good shape as well. 350 obo - pending
Interior paneling is in pretty good shape, wear and tear from people hitting the panels, stuff flying around in the cabin, small children, etc. etc. 200 obo
Center console has a hole for an alarm light as well as a slot (really ghetto, that's the way I bought it) for a switch that was taken out ... make an offer?
That's the stuff I have out or can get out in a timely fashion. If you need anything, hit me up on the pm's here or AIM: onicamber. Thanks
Engine was just rebuilt 15k miles ago, SRP pistons, Ferrea stainless steel exhaust valves, mild head work, tranny is good, no grinds, ACT HDSS clutch, fidanza 7 pound flywheel, stock axles. Once I take it out of the car, it'll be up for sale, probably ~4k for the whole swap?
Suspension techniques sway bars front and rear. Cobalt friction GT sports brake pads for stock gsr brakes. I won't take the brakes off until everything else is gone or off the car.
I don't have a vouch list, yet, but I'm working on it
Thread Starter
Honda-Tech Member
iTrader: (3)
Joined: Jan 2002
Posts: 2,456
Likes: 0
From: Albuquerque, United States of America
Shipping will be extra, prices are negotiable 
Driver's seat belt and mouldings $50

Fuel door cable $10

Trunk release cable $10

Back seat, driver's side lower door moulding $10

Back seat, driver's side upper door moulding $10
95 4door taillights that I painted red, a little scuff on the driverside light $100
Trunk lid for a sedan, spoiler holes plugged, I will take out the tail lights and the tails will be sold as a set $150


3rd brake light $20

Rear speakers, Acura Premium sound package, Pioneer $50
Trunk Panel that covers the latch $20

Interior paneling for the trunk $25
Trim piece for behind the back seat $20

Trunk lid seal $15

The front suspension is off, so the LCA's are for sale as well as the upper A arms. I have the stock ones as well as a set of Skunk2 camber adjustable a arms. I have the stock front sway bar with endlinks and a Suspension Techniques front sway bar with new endlinks and all hardware for installing into a gen 3 integra or a gen 5 civic. The battery perch and the charcoal canister came off as well.
The engine will be pulled next weekend, hopefully, with the rear suspension to follow and perhaps more from the engine bay, such as the power steering rack, tie rods, and subframe. From the back, I'll pull the suspension techniques rear sway bar and that'll be for sale along with the stock rear sway bar and endlinks.
Modified by garados at 11:16 PM 1/17/2005

Driver's seat belt and mouldings $50

Fuel door cable $10

Trunk release cable $10

Back seat, driver's side lower door moulding $10

Back seat, driver's side upper door moulding $10
95 4door taillights that I painted red, a little scuff on the driverside light $100
Trunk lid for a sedan, spoiler holes plugged, I will take out the tail lights and the tails will be sold as a set $150


3rd brake light $20

Rear speakers, Acura Premium sound package, Pioneer $50
Trunk Panel that covers the latch $20

Interior paneling for the trunk $25
Trim piece for behind the back seat $20

Trunk lid seal $15

The front suspension is off, so the LCA's are for sale as well as the upper A arms. I have the stock ones as well as a set of Skunk2 camber adjustable a arms. I have the stock front sway bar with endlinks and a Suspension Techniques front sway bar with new endlinks and all hardware for installing into a gen 3 integra or a gen 5 civic. The battery perch and the charcoal canister came off as well.
The engine will be pulled next weekend, hopefully, with the rear suspension to follow and perhaps more from the engine bay, such as the power steering rack, tie rods, and subframe. From the back, I'll pull the suspension techniques rear sway bar and that'll be for sale along with the stock rear sway bar and endlinks.
Modified by garados at 11:16 PM 1/17/2005
Honda-Tech Member
iTrader: (1)
Joined: Aug 2003
Posts: 7,616
Likes: 1
From: Left Coast : High Altitude, Top Floor
Yo, interested in the door moldings, but can you also sell me the rubber weatherstripping that runs from the front to the rear? The rubber that the door windows press against when closed??
Trending Topics
Honda-Tech Member
iTrader: (1)
Joined: Aug 2003
Posts: 7,616
Likes: 1
From: Left Coast : High Altitude, Top Floor
100% legit......
No ****** doubt....
If you need DB8 Parts and at a STEAL, pick your part now.
OR else I might be tempted to take EVERYTHING!
THanks for the parts....I'll be picking more from ya soon bro!
No ****** doubt....
If you need DB8 Parts and at a STEAL, pick your part now.
OR else I might be tempted to take EVERYTHING!
THanks for the parts....I'll be picking more from ya soon bro!
Thread Starter
Honda-Tech Member
iTrader: (3)
Joined: Jan 2002
Posts: 2,456
Likes: 0
From: Albuquerque, United States of America
Thanks for the kind words
I have a 4-2-1 OBX header for a type r, 2" collector. Comes with or without an 02 sensor. I also have the stock exhaust manifold for a 95 gsr. Can combine either with a 95 gsr cat or a 2.5" test pipe (test pipe and cat are same length). Make an offer on the stock manifold. Looking to get ~200(negotiable) + shipping for the header.
H22 CD5, your parts are ready to ship.
Stucked, your part is ready as well, just hit me back on PM.
Kadburry, I'll send you pics of your part (e-mail addy?) and shipping info hopefully tomorrow or the day after. Shoot me a PM.
to everybody else, ask if I have anything and I'll PM you back
Modified by garados at 2:05 PM 1/23/2005
I have a 4-2-1 OBX header for a type r, 2" collector. Comes with or without an 02 sensor. I also have the stock exhaust manifold for a 95 gsr. Can combine either with a 95 gsr cat or a 2.5" test pipe (test pipe and cat are same length). Make an offer on the stock manifold. Looking to get ~200(negotiable) + shipping for the header.
H22 CD5, your parts are ready to ship.
Stucked, your part is ready as well, just hit me back on PM.
Kadburry, I'll send you pics of your part (e-mail addy?) and shipping info hopefully tomorrow or the day after. Shoot me a PM.
to everybody else, ask if I have anything and I'll PM you back
Modified by garados at 2:05 PM 1/23/2005
im interested in the door accessories (not the panels but the switches coin holders and the lock covers)
maybe the back seat althought i really don't want leather...
is the carpet sold also?
maybe the back seat althought i really don't want leather...
is the carpet sold also?
Java script is blocked at my work so I can't respond to your pm until I go home. But I saw it. I think I also need all 4 pieces of your trunk plastics so gimme the price for those pieces, including the door switchs, coin holders and and covers which goes over the handles (basicly all the removables from the door panels with out taking the panels their self)
Shipped to 92801
Thanks
Shipped to 92801
Thanks
Thread Starter
Honda-Tech Member
iTrader: (3)
Joined: Jan 2002
Posts: 2,456
Likes: 0
From: Albuquerque, United States of America
I have the shift boot and trim ring so pm me and make an offer . the seats are still available
Thread
Thread Starter
Forum
Replies
Last Post





