here is the link
https://honda-tech.com/zerothread?id=1105397

 

For those of you who look at this, do you think the 1/4 panel damage could be fixed by having a new 1/4 welded on?

 

There is a lot of cosmetic damage there. Which could be a blessing in disguise. All that stuff is easily fixable. If the unibody got bent under the driver side door, that can be fixed pretty easily also. The engine looks straight in the pic. Also, is there something wrong with the passenger side front suspension? Wondering why the owner took off the tire to take a picture.

Aloha,
Brandon

 

I took off the tire cause the Hit on the passanger side Pushed the suspension in so I had to replace the upper control arm and the shock that was bent a little. The car is straight, Just needs someone with time and space which I dont really have. I am going to take pictures with the suspension On, I bought the rear trailing arm from the dealer brand new. Car drives straight. Drove it from NYC To Northern Jersey with no pulling to a side problem. Drives real good.

 

PM'd

 

With a 907A title, that becomes a real PIA. I have seen close friends deal with it and I would never get involved.

Good luck on what ever you do.

 

would certainly make a nice track car, if not rebuilt for road use..

based on the pics, I would concur that it is fixable.. reminds me of smitdog's body damage, just on both sides and a bit worse..

 

bump I'm interested and i sent u a PM

 

I can verify all information if anyone from out of state is interested in the above vehicle.

 

I was wondering if the car still available and if it is, email me your contact info and some pics from the interior and wheels.

raul_ny@yahoo.com

BTW, I'm from the NYC area and would be easy for me to go and see the car.