want following

ek9 - 1.86 ?
b16a2 - ?
b16a2 with crower 1.83 (81mm bore) stroker fitted ?
itr - ?

 

http://www.hondaswap.com/forum...=6061

 

did a little search but got contradicting info. thanks for that link. never new b16a/b were same.

anyone help on crower stroker kit and what itr defo is?

 

Engine, Bore, Stroke, Rod length, Rod Ratio

D15, 75mm, 84.5mm, 134mm, 1.59:1

D16, 75mm, 90mm, 137mm, 1.52:1

B16, 81mm, 77mm, 134mm, 1.74:1

B18b, 81mm, 89mm, 137mm, 1.54:1

B18c, 81mm, 87.2mm, 137.9mm, 1.58:1

H22, 87mm, 90.7mm, 143mm, 1.58:1

H23, 87mm, 95mm, 141.5mm, 1.49:1


These rod ratios are accurate for all variations of these engines ie: B16 a,b,1,2,3 etc.

You can figure out whatever rod ratio you want by dividing the rod length by stroke: B16 rod length= 134 divided by stroke 77 = 1.74.


Modified by 00Red_SiR at 12:52 PM 1/3/2005


Modified by 00Red_SiR at 12:56 PM 1/3/2005