So I broke the stock mount on my DX, after considering all my options i bought the Pro-fab mount. So heres my review.

Fabrication A+
Price(175$) D-
Function A+ (If you drive a racecar) if you dont D+

You see the problem is that i don't drive a racecar. These things are the stiffest mounts i have ever seen. A friend of mine has a hatch with a full set of Hasports and its not nearly as bad. Im seriously thinkin of sending this thing back.Anyone have any experience with these? Here's what they are.
http://www.profabdesigns.com/mounts3.htm


Modified by TurboTagTeam at 8:11 PM 12/31/2004

 

At least they look kinda nice.

If it's too stiff for you, just return it and try something else. I only have motor mount inserts and when I watched my car on the dyno, I noticed my engine hardly moves at all.

 

first time i ever seen them. looks nice, but yea i only had experience with hasport mounts. it just shook my dash and door panels just a bit. got used to it.

 

what would be some softer mounts then? one of my mount is broken and i need to replace mine

 

get an oem stock one and get energy suspension inserts. works real well . not bad for $40.

 

There is a chance it could be as bad as the HAsports but your friend prolly has the street urethane. I have the race urethane's plus energy tq mounts and my **** is solid as hell!

 

3M Window Seal it is the stuff for installing windshields. Price 12.00 buck a tube. You can buy it at NAPA
Works like a champ

 

So noone has any experience with these?

 

i did polyurethane cement sealant. the whole car became one giant vibrator.

 

Put them only in the front two torque mounts , if you do the rear it will vibrate all ovre the place , But damn the motor wont be moving