B20 Turbo Project Finished
Trending Topics
Honda-Tech Member
Joined: Mar 2002
Posts: 14,296
Likes: 1
From: Charleston, SC
Re: B20 Turbo Project Finished (chad)
Below are pictures of the dyno plots. Ignition timing is very conservative. Air Fuel on the 404whp was a steady 11.8-12.0 (besides at 6200 which was 12.2 which I later richened up a bit). I also added a bit more fuel to have around a steady 11.8:1 af with the 417whp pull at 23psi on pump gas. More power can definetely be derived from the engine with dialing in the camshafts and more timing of course, but with the current condition of the car more power is the last thing it needs. This car needs major suspension work/upgrades, brake upgrades, and a roll cage. With only 14psi there is pretty much zero traction until 4th gear. Overall I am very happy with how the tune went.
Joined: Nov 2004
Posts: 487
Likes: 0
From: Land of 10,000 Hmong
Re: B20 Turbo Project Finished (chad)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chad »</TD></TR><TR><TD CLASS="quote">
never in my life have i gotten out of a car shaking....this did it!</TD></TR></TABLE>
... 
never in my life have i gotten out of a car shaking....this did it!</TD></TR></TABLE>
...
Thread Starter
Moderator
Joined: May 2001
Posts: 12,232
Likes: 5
From: Browns Summit, NC, USA
Re: (pacifico)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pacifico »</TD></TR><TR><TD CLASS="quote">is this that gunmetal hatch?</TD></TR></TABLE>
i could tell you....but....you know...i'd have to kill you!!
i could tell you....but....you know...i'd have to kill you!!
Honda-Tech Member
Joined: Mar 2002
Posts: 14,296
Likes: 1
From: Charleston, SC
Re: (mtber)
http://www.av-engineered.com/customers/B20/B20.mov
12psi and not the best video.... as you can see this car has zero traction. Give me a call Chad when the bugs are worked out and we can take some better video's and what not.
12psi and not the best video.... as you can see this car has zero traction. Give me a call Chad when the bugs are worked out and we can take some better video's and what not.
Joined: Oct 2004
Posts: 959
Likes: 0
From: work
Re: (PrecisionH23a)
How can you guys be ooogling over a car with such low compression? With the hugely dished wiseco's that motor would sit at 8.16:1 compression with a stock headgasket. With a .065" headgasket it would be around 7.67:1 compression. Wait a minute, I thought any honda with less than 9:1 compression is going to feel like **** on the street, lol.
Nice numbers, nice car. Prove those high compression loving hippies wrong
Nice numbers, nice car. Prove those high compression loving hippies wrong
