JDM D15B Vtec 89 Hatch 1100 FIRM LOOK
Thread Starter
Joined: Mar 2004
Posts: 948
Likes: 0
From: Streetsboro, Ohio, USA
JDM D15B Vtec 89 Hatch 1100 FIRM LOOK
This car is not in show condition, i just painted it in a small garage with no light, so it looks kinda shitty unless its raining lol, also needs some body and interior work, Email me at joene2004@yahoo.com if you are interested, I live in streetsboro its about a half hour from cleveland, ......... I will get pictures on tuesday im busy working until then...............
hey, well first i want to tell u, the car is not near perfect it was my project until i ran out of money ,now im in bad debt, no radio, the windsheild is cracked, the hood is banged up due to it flying up on me while driveing once, the interior is somewhat stripped (backseat and **** that goes in behind the backseat, and center console)There is carpet covering everywhere thought including where the backseat went, battery is in the back because i was planning on turbo, car was in minor accident with driver door so i went to a junkyard and the guy said a 91 door would fit....it doesnt line up right, it closes but body lines dont line up perfect, the car has a fresh coat of paint on it but its uneven high and low spots and little bit of rust on rear quarters where every civic in ohio rusts, some good things.... Full 2 1/4 inch exhaust with cannon muffler exiting at angle, airmass header, k&n intake, jdmd15b engine the only thing about the swap is the car started out as a dx, so i converted to mpfi and im still using a pm6 ecu so the vtec does not work until i get a activation switch and the 89 si distributer is rigged up to work with the new engine IT DOES PASS ECHECK in ohio, i have a set of steel rims with new winter tires on them, and the rims in a couple of the pics ill send you, carbon fiber euros, clear corners and bumper lights, ALSO>>the car ias lowered with matrix coilovers and kyb-gr2 gas shocks, rides good for how low it is, all new tie rods upper control arms and ball joints new tires on steel rims.... up front Sorry this is so long i didnt know how discriptive u wanted me to be, im taking any offers right now.......HERES THE ONLY PICI HAVE RIGHT NOW
Modified by Layziebtnh055 at 10:53 AM 1/4/2005
Modified by Layziebtnh055 at 9:23 PM 1/14/2005
hey, well first i want to tell u, the car is not near perfect it was my project until i ran out of money ,now im in bad debt, no radio, the windsheild is cracked, the hood is banged up due to it flying up on me while driveing once, the interior is somewhat stripped (backseat and **** that goes in behind the backseat, and center console)There is carpet covering everywhere thought including where the backseat went, battery is in the back because i was planning on turbo, car was in minor accident with driver door so i went to a junkyard and the guy said a 91 door would fit....it doesnt line up right, it closes but body lines dont line up perfect, the car has a fresh coat of paint on it but its uneven high and low spots and little bit of rust on rear quarters where every civic in ohio rusts, some good things.... Full 2 1/4 inch exhaust with cannon muffler exiting at angle, airmass header, k&n intake, jdmd15b engine the only thing about the swap is the car started out as a dx, so i converted to mpfi and im still using a pm6 ecu so the vtec does not work until i get a activation switch and the 89 si distributer is rigged up to work with the new engine IT DOES PASS ECHECK in ohio, i have a set of steel rims with new winter tires on them, and the rims in a couple of the pics ill send you, carbon fiber euros, clear corners and bumper lights, ALSO>>the car ias lowered with matrix coilovers and kyb-gr2 gas shocks, rides good for how low it is, all new tie rods upper control arms and ball joints new tires on steel rims.... up front Sorry this is so long i didnt know how discriptive u wanted me to be, im taking any offers right now.......HERES THE ONLY PICI HAVE RIGHT NOW
Modified by Layziebtnh055 at 10:53 AM 1/4/2005
Modified by Layziebtnh055 at 9:23 PM 1/14/2005
Trending Topics
Honda-Tech Member
Joined: Jul 2003
Posts: 3,513
Likes: 0
From: Earf
Re: JDM D15B Vtec 89 Hatch 1100 FIRM LOOK (Noah *****)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Noah ***** »</TD></TR><TR><TD CLASS="quote">what a pile of ****! i hope you dont get even half of that</TD></TR></TABLE>
i would expect that kind of post from you
i would expect that kind of post from you
Thread Starter
Joined: Mar 2004
Posts: 948
Likes: 0
From: Streetsboro, Ohio, USA
Re: JDM D15B Vtec 89 Hatch 1100 FIRM LOOK (Noah *****)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Noah ***** »</TD></TR><TR><TD CLASS="quote">what a pile of ****! i hope you dont get even half of that</TD></TR></TABLE>
well thanks for the bump
well thanks for the bump
Honda-Tech Member
Joined: Apr 2002
Posts: 2,964
Likes: 0
From: sioux falls, sd
Re: JDM D15B Vtec 89 Hatch 1100 FIRM LOOK (Layziebtnh055)
i will give you $1000.00 shipped to south dakota. Let me know mattyhatch82@yahoo.com
Honda-Tech Member
Joined: Sep 2002
Posts: 2,865
Likes: 1
From: Wooster, Ohio, usa
Re: JDM D15B Vtec 89 Hatch 1100 FIRM LOOK (Layziebtnh055)
i must have posted on the wronge thread im in ohio.
and im kindove interested. would you sell just the shell on the steel wheels?
if so how much. ill even pull the engine for you.
would you take 500 without the rims?
and im kindove interested. would you sell just the shell on the steel wheels?
if so how much. ill even pull the engine for you.
would you take 500 without the rims?