Ok, guys we will be putting the finishing touches, hopefully by monday, on the 3" downpipes for the Drag 3 and rev-hard turbo kits. The rev-hard has been done for months now, but we wanted to realease them at the same time. I will be using flamenco-t 's car as our testing vehicle. As you know we made the downpipes for drag without the use of a car, we had a manifold and a spare block that we used. What we found out is that they would never match up, but now they will.

I will have a group buy introductry price, but I will need at least 10 buyers from drag and 10 for Rev-hard to get the group price. Price is not finalized and I will give you more info as the days come.

Thanks for your time...

art

 

greddy!!!!!!!!!!!!!!!!!1

 

awesome...Ill be buying one in the future

 

Art you can use my car as the test car for the Greddy. . .I'll see you Monday.

 

just to let everyone know, I purchased one of these for my DRAG kit. The quality is TOP NOTCH. Although I haven't fitted it yet, it's very complete (flange and all), and very very nice. Includes flex pipe also, really nice. You cant go wrong with this downpipe.

 

I also have one of these for my drag kit. the fit was actually better than that of my original drag 2.5 inch DP. Art was quick and responsive. I also agree that quality is top notch.

 

hummm, maybe I should just buy a revhard manifold and get Art's dp also....

 

How much for the DP?

 

i might be interested int he rev hard dp is there any clue to what pricing would be liek a ball park figure?

 

i might be interested in one as well. (drag)

 

Damn....timing was a little off, otherwise I would have been in this GB with you guys.
Anyway, Art's downpipes are really high quality from what I've heard and the pictures I've seen. Anyone who doesn't know a good welder should jump on this immediately. Gains are pretty noticeable going to 3".

 

Well you guys remember that the last time I did this they were about $315 shipped, but Im thinking in the $275-290 shipped.

This is what I need to do:
First, I want to place a huge order, like 20 downpipes, and use my own money so I can have these in stock. Now, coming from a poor racer like me that is gonna cost me alot of my own money out of my pocket but I think you guys are worth it. Hopefully I should have complete details on Tuesday when I get back, so see ya then...

art

 

sorry, just woke up, I am going to SA now...

stan

 

Thanks for the update Art.

It did look pretty!

 

Actually mine matched up, once i chopped off the closed loop pipe.

 

Yeah, funny how it always hard to "have your cake" and "eat it too"!
Hopefully with a closed loop dp and the Hondata I'll be able to pass VA inspections ....

 

I'm definately interested!!!

 

Oh GOD am I freaking TIRED!!! I was up for about 2 days getting ready for this and I can now say its 85% done. Here are some of the pics I took while we were finising up. NOTE: This is not the finished product. It will not look this bad in real life because this was just to test fit things.
downpipe1</A> <A HREF="http://www.turbomafia.com/Arturbo/downpipe/05.jpg" TARGET="_blank">downpipe 2
downpipe 3
downpipe 4
downpipe 5
downpipe 6

art

 

will it be avaliable in a full 3 inch version?


[Modified by BowSeR, 1:16 PM 1/8/2002]


[Modified by BowSeR, 1:17 PM 1/8/2002]

 

downpipe 1
downpipe 2
downpipe 3
downpipe 4
downpipe 5
downpipe 6


fixed


[Modified by 00SilverLS, 4:15 PM 1/8/2002]

 

Thanks, but I fixed them in the original post...

art

 

I'm in for a full 3" open loop for drag

 

damn, my car is dirty.....

yeah I am tired too, I was supposed to be at work around 10-11ish, I just got here...5pm heheheheh

 

I just want to help where I can.

 

email sent