PM me if you're interested or post up here, I'll try to look at it as much as possible, but a PM would probably be better. Most of these parts are from my blown block (cracked sleeve) which had ~35k on it and others are from a block I picked up which I was told had about 70k on it. Shipping will be additional......I'll try to update the prices to include shippping. As far as vouches, I belong to a local forum and can prolly get some from a bunch of the members there. I will if you are really that worried about it. Also, I can email you pictures if you'd like, I will also try not to be lazy and post em up here soon too.


1 B16 crank in good condition - 50

4 B16 Stock Rods with all hardware (pistons are still attached and fried, I will not seperate them for you, but you are only paying for the rod/s you get fried pistons for free, actually I believe one of them is still good) - 40

1 B16 Bare block in good condition, with mains, and misc. sensors - 60
(block with oil pump, water pump, and crank) - 115

1 B16A2 bare block with a cracked sleeve, has mains, misc sensors; Very clean block for resleeving and building a rev/boost monster - 40
(block with oil pump, water pump, and crank) - 90

2 B16 Lower timing belt covers - 7 each : 1 sold to tgreaves, 1 still for sale
2 oil pumps - 25 each
1 B16 stock flywheel, needs resurfacing - 20
1 B16 stock crank pulley with key - 20
crank pulley gear, washers, and keys - 10
1 b-series oil pickup - sold to tgreaves
1 b-series windage tray (mint) - 20
1 b-series oil pan (excellent condition) - sold to tgreaves
1 b-series clutch disc and pressure plate, pretty worn disc, PP is ok but a kinda beat too with a few hot spots....lowball me - 10
If you want me to strip a block for little parts I may (such as water pump, water pipe, anything you may be missing to complete your swap or rebuild)

Also have bolts for flywheel, and many other things
A bunch of OBD1 injector clips - 10 per set of 4
a couple resistor boxes to run low impedance injectors (dsm 450's) (note- the clips are cut, so it's just the wires coming out) - 15 each
2nd gen altezza tails that fit a 96-00 civic - 40
Chrome exhaust tip - 5


Modified by folicor at 1:42 AM 1/8/2005

 

BumP!

 

up for the early late night crew.

 

clutch, PP, flywheel sale pending
stock rods - also pending


And, feel free to post in this thread too, I've been checking it more than I thought I would be.

 

is that b16a2 with the cracked sleeve a 99 or 00 block?

 

it came from my 99 SI that I blew up due to bad fuel management. The block, minus the cracked sleeve of course, is in beautiful shape. It only had about 34k on it, and it was never driven in the winter, or even rain that often for that matter, so it's pretty clean.

 

Cranks, windage, oil pickup

This is the b16 in good shape, you can't see the sleeves really well, but they are in great shape, probably doesn't even need a hone




random pic of everything for sale

Rods, pistons still attached, the 3 pictured are fried however one of them is good. I do have the 4th


Here is the b16a2 that came from my 99 SI. This block is clean but you can see the cracked sleeve in the pics.

 

sales pending on a lot of things, i'll update after the holidays. the people who got to me first got dibs, but pm me if you need stuff, and i'll let you know if current sales fall through.

 

holiday bump for people who now have cash.

 

been PMing and IMing you!!!!whats the deal..i want the full block w/ all internals and sensors....PM or IM me SQP3R...TY

 

Yeah, I'm still tryin to get you a shipped price. I gotta see what shipping will cost. Oh and also, if you're trying to build a full shorty, I'll swap all the better condition parts (water pump, oil pump, water pipe, etc) from my b16a2 w/a cracked sleeve (35k miles on it, so all the parts are in amazing condition) to the block I'd be selling you. So basically you'd be getting really fresh parts and the only thing that would be older is the block itself that had the higher miles on it. So that'll be nice to build up a shorty with.

 

you have IACV or jut bottom end parts

 

just bottom end parts sorry.

 

oh, It's all good thanks though

 

bump for you.

 

if u could do that for me that would be awsome..u can also IM me at SQP3R..thanks man and bump for this guy!!!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DC2 BoZz &raquo;</TD></TR><TR><TD CLASS="quote">if u could do that for me that would be awsome..u can also IM me at SQP3R..thanks man and bump for this guy!!!! </TD></TR></TABLE>

Didn't forget about you man, I'm tryin to get a hook up on shipping for ya through some ppl I know. Better prices = happier people. If your in a hurry though for it and want to pay full boat on shipping I'll gladly do that though too. Let me know.

 

nah man no rush at all i was getting scurd that u forgot about me and sold it to someone else...lol...thanks

 

b16a2 w/cracked sleeve - pending, awaiting payment
b16 w/crank, rods, flywheel, and crank pulley - pending, dibs to BOZ
oil pan, oil pickup, and lower timing belt cover - pending to tgreaves

Keep PM'ing me in case anything falls through.

 

updated parts list, blocks still pending but first to come up with cash gets em. Oh yeah, also, the shipping I'm charging for the blocks is dirt cheap. I was looking to get 200 shipped for the better block, with crank, oil and water pump, flywheel, rods, and crankpulley. That's a few parts short of a shortblock!

for the cracked sleeve block bare w/mains (no oil or water pump) I was looking to get 90 shipped to your front door. PM me, the more parts you want the cheaper I'll sell them for. first come first serve.