Motor:Golden Eagle sleeved 84.5mm bore ls block with: cp 84.5mm 9.0:1 comp pistons, eagle rods, acl bearings, gs-r crank, arp head studs b20 head gasket, head on the block is a stock gs-r w gs-r manifold (the only problem with the head is when I received it I never got the correct cam caps and one of the caps worn into the cam pretty good so it need to have the cam caps line bored).

b16a head: fully port and polished b16a head, new valves, 5 angle valve grind, Rocket Motorsports valve springs, port matched and ported b16a intake manifold. The rocker arms are showing some wear but I have another set of rocker arms and lma's for the buyer. SOLD!!!!

Turbo: I have a precision sc-61 turbo, 70 a/r compressor side 3 inch v band on the exhaust. Turbo has 50 miles on it but it need a new compressor wheel ($100) spins awesome, turbo is good for 650 hp says presicion.

other turbo stuff: ss auto mani, egt gauge, boost gauge, blitz tt, tial bov, tial 40 mm gate w 11 psi spring, sparco front mount intercooler, 1 extra vortec fmu.

MISC: 2 stock ls heads one is a core one is complete, 1 gs-r intake manifold, 3 b series throttle bodies, 1 stock b16a intake manifold, 2 ls blocks both had spun bearings but would be great for one to have sleeved or built. MSD sci ignition w msd 2 step and blaster HVC coil.

I also have a apex-i vafc 2 and a plx m-300 wideband.

The only things I am interested in trade wise would be a bone stock good running b16a or gs-r motor and I am looking for a reliable cheap daily driver for winter time. I will get some prices on everything and I will get some picts in the next few days. I am also open for offers .....thanx.
Hit me up pm, e-mail at sagep11@comcast.net or my aim is crxhfturbo

pict of block before it was assembled only 1200 miles right now 1600 without head 1800 with head.












Modified by DohcVtecCrx at 1:46 AM 12/24/2004


Modified by DohcVtecCrx at 5:52 PM 12/26/2004


Modified by DohcVtecCrx at 7:36 PM 12/27/2004

 

What u want for the intercooler? and dimensions?

Also you sure thats a 40mm wastegate?? From the picture it looks like a 38mm

 

yes in the pict that is a used tial 38 mm I have the 40 new never used in the box no picts yet.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Cabby89 &raquo;</TD></TR><TR><TD CLASS="quote">What u want for the intercooler? and dimensions?

Also you sure thats a 40mm wastegate?? From the picture it looks like a 38mm</TD></TR></TABLE>
prolly 150 plus ship, I have not measured it yet but I will tonight.

 

Yea if you could get me the dimensions that would be great so I can figure out if it will fit. Who makes the core and any idea on flow numbers?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Cabby89 &raquo;</TD></TR><TR><TD CLASS="quote">Yea if you could get me the dimensions that would be great so I can figure out if it will fit. Who makes the core and any idea on flow numbers?</TD></TR></TABLE>

26" long X 6 inches high X 3 inches thick. It is a sparco intercooler.

 

how much you asking for the vafcII? i know someone who's looking for one

 

$225 shipped

 

howmuch for the turbo in its current condidtion, im taking it, that its a t3 turbine sc61 as well?

 

$500 OBO

 

turbo $500 OBO
Vafc2 $225 shipped
Wideband $285 shipped
tial 40mm gate $265 shipped
msd best offer
pyro gauge $85 obo
TT $55
tial BOV $150
Sparco i/c $150 plus shipping
fmu $50

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DohcVtecCrx &raquo;</TD></TR><TR><TD CLASS="quote">26" long X 6 inches high X 3 inches thick. It is a sparco intercooler. </TD></TR></TABLE>

OK that just the core or that with the end tanks? If I find that it fits Ill prolly take it.

Ohh and do you mean Spearco??

 

yeah spearco and yes the is measured end to end it was on my friend 98 integra it looks like it will fit most honda/acura I ever seen.

 

OK cool, its not going on a Honda/Acura. Its going on my VW behind the grill so wanna check clearance for it.

Any bent fins or anything? What kind numbers were made with teh intercooler?

 

oh ok...it is in really good shape, I know he paid over $250 for it new, #'s I dunno he ran 13.9 here in SLC at 4700 feet which is an easy 12.9 at sea level w 7psi on a stock ls w a t3/t4 and the ss auto mani w 38 mm tial gate.

 

pm's replied

 

even more pm's replied

 

bump for good price

 

thanks dude

 

Damn this is a brand new in the box never used 40 mm gate for $265 shipped, people are selling used ones for $300...cmon people look at the prices here.

 

b16a head pending sale

 

message sent

 

wastegate picts:

 

anyone need picts of anything else? I need to get more picts of the BOV post if you want picts of anything else.

 

all pm's replied