in the picture of the manifold, if you look at the very bottom left of the manifold, there is a device attached to the back, with a vacuum hose at the top, and a wire at the bottom (wire not shown on the pic).
what the hell is it, and what does it connect to?

I understand that the device on the other side of the manifold (next to the TB) is the EACV.

thanks
S.

 

Fast idle solenoid..
Leave it disconnected is what most do..
[other year models have it on the firewall]

 

****, that was quick! thanks.
I am dropping a D16A6 in my DX, and while doing the harness conversion, I found the rectangular two-pin plug on the manifold, and we trying to figure out where to plug in on the DX harness. I guess i won't plug at all.

thanks.