ok i just rebuilt my sohc sc with vitara pistons and eagle rods and all that ****. its runs pretty strong.. so far. ok thats not the problem,
the FIRST problem is the front end suspension. the DS wheel after replacing the bearings still have play when you shake it?? everything is on good and the bearings seemed perfect and in the back of the NEW rotor its being totally fucked by the caliper scraping into it (it has new pads too)

Now the pass side, it has stock suspension from what i know,?. But one of the hubs that were on the knuckle said "92" on it and it stuck it a lil bit. I put an ef hub in there the camber is still ridiculous the toe in is so bad they said they wont give me an alignment and where tlaking about drilling new holes for my strut in the engine bay. could it be the wrong LCA or UCA? I am so puzzled.


Also i have rightside hyperblink and its making me feel like a ricer hah, all 3 turn signals work (corner lens, bumper lens, and rear) so i dont get how this would happen??

this is all i can think of now, im sure there is more ****! thanks for your help and sorry for the long *** story!

Shaun

 

ttt

 

bump