I need your best guess
Hey guys! As some of you may know Im buying this hatch in the pic, this weekend. Now I want to run some 15" rims on it (those are 16's on it now) but Im not sure if they will fit. Do you guys think that 15" wheels will fit over those brakes no prob?

Could this be a rear brake picture? I dont know which wheel it is...do the calipers mount like that in the rear?

Could this be a rear brake picture? I dont know which wheel it is...do the calipers mount like that in the rear?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hatchback_al »</TD></TR><TR><TD CLASS="quote">
Could this be a rear brake picture? I dont know which wheel it is...do the calipers mount like that in the rear?
</TD></TR></TABLE>
Hatches dont have rear disc brakes..They have drums..
That 16" wheel barely clears the brake..
Could this be a rear brake picture? I dont know which wheel it is...do the calipers mount like that in the rear?
</TD></TR></TABLE>
Hatches dont have rear disc brakes..They have drums..
That 16" wheel barely clears the brake..
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b-clubspecII »</TD></TR><TR><TD CLASS="quote">maybe your hatch has drums..... mine doesnt
</TD></TR></TABLE>
Im sayin 88-91 dx/si/std/cx(canda) hatches have drums in the rear from the factory
Only 90-91 crx si has 4-wheel disc brake..
</TD></TR></TABLE>Im sayin 88-91 dx/si/std/cx(canda) hatches have drums in the rear from the factory
Only 90-91 crx si has 4-wheel disc brake..
When i put SiR front brakes on my car I didn't think my 15" wheel would fit. Those rotors are 10.3".
I have about 3/4" between the caliper and inner part of rim.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IC33 »</TD></TR><TR><TD CLASS="quote">it would be close your best bet is to try one on</TD></TR></TABLE>
I agree.
I have about 3/4" between the caliper and inner part of rim.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IC33 »</TD></TR><TR><TD CLASS="quote">it would be close your best bet is to try one on</TD></TR></TABLE>
I agree.
Good, Bad…I'm the one with the gun
Joined: Jul 2002
Posts: 5,241
Likes: 2
From: Trapped in time, Surrounded by evil, Low on gas
those seem to be 13" KVR python kit, i highly doubt any 15" wheel will clear that caliper.
if any TDR pro 1 or Pro 2 might work.
how much was that car? the kit alone is $1500?
stan
if any TDR pro 1 or Pro 2 might work.
how much was that car? the kit alone is $1500?
stan
how about you send me the goddam ecu you were supposed to send in october?? you have to to buy a car and post all these pics but you cant stop at the post office???????
Thread
Thread Starter
Forum
Replies
Last Post
mackymcg
Honda CRX / EF Civic (1988 - 1991)
4
Feb 21, 2003 05:58 PM



