FS: Tons of GSR Parts for your B18C or B18C1 Motors! ECU, Intake Manifold, clutch, flywheel, shift
Thread Starter
Honda-Tech Member
Joined: Aug 2003
Posts: 931
Likes: 0
From: Orange, CA, USA
FS: Tons of GSR Parts for your B18C or B18C1 Motors! ECU, Intake Manifold, clutch, flywheel, shift
Welcome to my GSR Garage Sale!
Parts are from a 94-95 JDM B18C GSR Motor. Parts were left over after my swap unless otherwise noted. Tons of stuff for sale. I also have a B18C1 Longblock that I am parting out if you are interested. I will soon have a thread for that as well.
VOUCH THREAD: https://honda-tech.com/zerothread?id=832453
On to the parts......
1.) 94-95 JDM B18C Intake Manifold- $40 + shipping obo
Comes with all sensors. A little salt deposits from its way over to the USA, but you can clean it up. Good condition. Comes with manifold only, no throttle body.
2.) 94-95 JDM B18C Engine Wire Harness - $110 shipped obo
Came from the B18C swap from PasswordJDM.com. Its your standard B18C harness that comes with a swap. Some of the wires are cut.
3.) OBD-1 JDM P72 ECU - SOLD
4.) GSR Shift Linkage - $115 shipped obo
Comes with shifter. Got with the swap, no need for it.
5.) 94-95 JDM B18C Alternator - $50 shipped obo
Came with the swap, used a new alternator instead.
6.) JDM B-Series Flywheel - $50 shipped obo
Came out of the JDM swap.
7.) JDM B-Series Clutch - $ MAKE AN OFFER
Came out of the JDM swap, disc looks pretty worn.
8.) OBD-1 JDM B18C Distributor - $120 shipped obo
Came off the JDM swap.
9.) OBD-1 B-Series Injectors - $45 shipped obo
Came from the JDM swap
10.) JDM GSR Fuel Rail - $35 shipped obo
Off the JDM swap.
[B]11.) B-Series Crank Pulley - SOLD
Thats all for now folks.
Modified by Hoodwinked at 9:35 PM 12/9/2004
Modified by Hoodwinked at 12:35 AM 12/10/2004
Modified by Hoodwinked at 12:14 AM 12/13/2004
Modified by Hoodwinked at 12:14 AM 12/13/2004
Modified by Hoodwinked at 11:38 PM 12/21/2004
Modified by Hoodwinked at 12:11 AM 12/22/2004
Parts are from a 94-95 JDM B18C GSR Motor. Parts were left over after my swap unless otherwise noted. Tons of stuff for sale. I also have a B18C1 Longblock that I am parting out if you are interested. I will soon have a thread for that as well.
VOUCH THREAD: https://honda-tech.com/zerothread?id=832453
On to the parts......
1.) 94-95 JDM B18C Intake Manifold- $40 + shipping obo
Comes with all sensors. A little salt deposits from its way over to the USA, but you can clean it up. Good condition. Comes with manifold only, no throttle body.
2.) 94-95 JDM B18C Engine Wire Harness - $110 shipped obo
Came from the B18C swap from PasswordJDM.com. Its your standard B18C harness that comes with a swap. Some of the wires are cut.
3.) OBD-1 JDM P72 ECU - SOLD
4.) GSR Shift Linkage - $115 shipped obo
Comes with shifter. Got with the swap, no need for it.
5.) 94-95 JDM B18C Alternator - $50 shipped obo
Came with the swap, used a new alternator instead.
6.) JDM B-Series Flywheel - $50 shipped obo
Came out of the JDM swap.
7.) JDM B-Series Clutch - $ MAKE AN OFFER
Came out of the JDM swap, disc looks pretty worn.
8.) OBD-1 JDM B18C Distributor - $120 shipped obo
Came off the JDM swap.
9.) OBD-1 B-Series Injectors - $45 shipped obo
Came from the JDM swap
10.) JDM GSR Fuel Rail - $35 shipped obo
Off the JDM swap.
[B]11.) B-Series Crank Pulley - SOLD
Thats all for now folks.
Modified by Hoodwinked at 9:35 PM 12/9/2004
Modified by Hoodwinked at 12:35 AM 12/10/2004
Modified by Hoodwinked at 12:14 AM 12/13/2004
Modified by Hoodwinked at 12:14 AM 12/13/2004
Modified by Hoodwinked at 11:38 PM 12/21/2004
Modified by Hoodwinked at 12:11 AM 12/22/2004
Junior Member
Joined: Oct 2004
Posts: 54
Likes: 0
From: shelton, CT, usa
Re: FS: Tons of GSR Parts for your B18C or B18C1 Motors! ECU, Intake Manifold, clutch, flywheel, sh
yo man is that ecu for a manual, obd1 gsr p72, if it is i will take it.. email me at heatmiser_2003@yahoo.com or call me at 203-619-4723
Thread Starter
Honda-Tech Member
Joined: Aug 2003
Posts: 931
Likes: 0
From: Orange, CA, USA
Re: FS: Tons of GSR Parts for your B18C or B18C1 Motors! ECU, Intake Manifold, clutch, flywheel, sh
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by heatmiser8883 »</TD></TR><TR><TD CLASS="quote">yo man is that ecu for a manual, obd1 gsr p72, if it is i will take it.. email me at heatmiser_2003@yahoo.com or call me at 203-619-4723</TD></TR></TABLE>
emailed
emailed
Thread Starter
Honda-Tech Member
Joined: Aug 2003
Posts: 931
Likes: 0
From: Orange, CA, USA
Re: (jlacoy82)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jlacoy82 »</TD></TR><TR><TD CLASS="quote">Bump for hoodwinked, he just made my motor build a little more complete. 
</TD></TR></TABLE>
bumps
</TD></TR></TABLE>bumps
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hoodwinked
For Sale
7
Apr 17, 2005 06:59 PM