sorry if any of you have covered this subject already but I need to know what all is needed to put a zc tranny in a 89' si crx. I've called a lot of junk yards looking to see if they had an si tranny I could use but they did not. Thanks, Jeff

 

you will need axles too.im too lazy to find out what kind sry.

 

you will need equal length from a teg

 

Also, you must use the ZC intermediate shaft.

If you want, you can use Si axles if you swap out the ZC diff with one from an Si. You'll also need the Si axle seals. Just mentioning this... random info.