Does anyone know where i can get a sharp 90 degree metal elbow? I am trying to fab up my I/C pipin for my integ. I am running a full race manifold with a sc61s turbo. The turbo is sitting pretty low. the piping from the intake mani to the i/c are done, but im having dificult time fitting the turbo outlet to the i/c. I could use a silicone 90 degree, but i have heard that they tend to stretch. Any help would be apreciated.

 

are you looking for a 90deg elbow to weld on to the compressor housing or just a 90deg peace of pipe??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by newgsr &raquo;</TD></TR><TR><TD CLASS="quote">are you looking for a 90deg elbow to weld on to the compressor housing or just a 90deg peace of pipe??</TD></TR></TABLE>

Yea what he's asking. If your looking for the 90 deg off the compressor, Ive got that. If your looking for the 90 deg that wraps around the fender area to the compressor, ive got that also

 

hks makes it find any hks distributor....... dynamic turbo 305-593-6160

 

I was looking like something like this.



Its a piece from one of the for sale ads. But i need it in 2.5". I Have the u bend all fabbed up to go from the i/c to the turbo, but i tried using a 90 degree bend, but the angle wasnt sharp enough. there was nothing for the silocon coupler to connect to comming off the turbo.

 

http://www.jcwhitney.com/

 

I have a greddy piece for sale. new...Pm me if you are interested