FS: Near complete B series turbo kit DC/MD/VA
Ok, decided to sell the turbo parts after all, seems i need money bad.
-Garrett t3/t04e 57 trim, .60 housing, .48 exhaust
-Turbo needs compressor side seal, when i had the larger feed line on, oil went past it, theyre like 50 bux.
-2.5->3" downpipe
-Inline pro stainless manifold
-Thermotec wrap on turbo(kinda raggy, but works great)
-Full 3" exhaust(needs to be reflanged at the axle.
-3" carsound cat
-3" resonator
-3" flexpipe
-450cc dsm injectors WITH resistor box
-autometer boost gauge
-Tial 35mm wastegate
-Wastegate runner
-3an oil feed
-10an oil return
-Tapped oil pan(trade for yours)
-Dump tube
-misc vacum lines
-misc intercooler pipes NOT ALL OF THEM
-Including fmic, its about 30x7/8x3 from tank to tank, it did get damaged, but if you flip it over, i DONT think itll have a problem holding pressure.
-Will include BRAND NEW walbro 255lph fuel pump with kit for 1750.
PICKUP ONLY.
NOT AC COMPATIBLE
looking 1700 obo. LOCAL PICKUP. I AM IN SOUTHERN MD.
1600 obo, INCLUDING BEZEL, AND ILL THROW IN AN AIR FUEL GAUGE(autometer z series.
Also have a dual gauge bezel for integra-50
CTR/ITR LSD-250
Gsr trans/internals(needs outer housing) with lsd 700 including brand new, uninstalled 1-2 set
without lsd and still including gearset 500
95 LS ECU, socketed, chip not burned.- offer.
Modified by My95SlvrBlt at 11:29 PM 12/1/2004
-Garrett t3/t04e 57 trim, .60 housing, .48 exhaust
-Turbo needs compressor side seal, when i had the larger feed line on, oil went past it, theyre like 50 bux.
-2.5->3" downpipe
-Inline pro stainless manifold
-Thermotec wrap on turbo(kinda raggy, but works great)
-Full 3" exhaust(needs to be reflanged at the axle.
-3" carsound cat
-3" resonator
-3" flexpipe
-450cc dsm injectors WITH resistor box
-autometer boost gauge
-Tial 35mm wastegate
-Wastegate runner
-3an oil feed
-10an oil return
-Tapped oil pan(trade for yours)
-Dump tube
-misc vacum lines
-misc intercooler pipes NOT ALL OF THEM
-Including fmic, its about 30x7/8x3 from tank to tank, it did get damaged, but if you flip it over, i DONT think itll have a problem holding pressure.
-Will include BRAND NEW walbro 255lph fuel pump with kit for 1750.
PICKUP ONLY.
NOT AC COMPATIBLE
looking 1700 obo. LOCAL PICKUP. I AM IN SOUTHERN MD.
1600 obo, INCLUDING BEZEL, AND ILL THROW IN AN AIR FUEL GAUGE(autometer z series.
Also have a dual gauge bezel for integra-50
CTR/ITR LSD-250
Gsr trans/internals(needs outer housing) with lsd 700 including brand new, uninstalled 1-2 set
without lsd and still including gearset 500
95 LS ECU, socketed, chip not burned.- offer.
Modified by My95SlvrBlt at 11:29 PM 12/1/2004
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
sleepencivic
Classifieds: Forced Induction
34
Mar 8, 2015 12:25 AM
chubz0r
Mid-West (Sales)
38
Jul 21, 2007 10:21 PM
clemsonteg
Classifieds: Forced Induction
19
Jan 14, 2006 06:59 PM



