since the thread is locked for unknown reason, i will post another one here.
my friend's car got them, they run real good for the stock engine. i was impressed by the horse power and torque. it almost makes me think that it is so stupid to build a 2.0 b-series engine.

here again is the dyno sheets.

 

wait. which IPS is this? ipsracing? or IPS... yeah, what happened to that thread?

 

edo's cams rock!!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spoon_ek9 &raquo;</TD></TR><TR><TD CLASS="quote">since the thread is locked for unknown reason, i will post another one here.</TD></TR></TABLE>

The thread was locked because it appeared to be a commercial for the product.

When a thread starts out with a manufacturer being "pleased to announce" this and that, it's not the best sign in the world.

If your "friend" [sic] <u>paid</u> for these cams and can come in here himself and tell us about the experience, then that is fine.

If it turns out he did not pay for the cams, that it was part of a promotional effort, and/or that you are a friend or employee of the manufacturer, then you have to understand that the information is attainted and you have to understand that this thread will also be locked.

On the other hand, if you can make it clear that the dyno's reliable and that we are hearing from reliable people who actually paid for the product, you're welcome to disseminate the information, and we're delighted to have the information to add to our knowledge.

 

grandpa holding it down.

any specs of this cam?

 

what else is done to the motor?

 

yeah what else was done, what type of header most importantly?

 

thats some nice numbers! f*cking k series are amazing.

 

this thread is worthless with out any info.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hOndafienD 04 &raquo;</TD></TR><TR><TD CLASS="quote">thats some nice numbers! f*cking k series are amazing.
</TD></TR></TABLE>

I seen VERY similar #'s ( I have seen dynos of 235-250whp ) with jdm k20a's with bolt-ons (on dynopack dyno's)..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ghettoracer &raquo;</TD></TR><TR><TD CLASS="quote">this thread is worthless with out any info.</TD></TR></TABLE>

i agree...what else is done to the motor....i know you cant make that much power by just adding cams...that would b BS!!!

 

it only got stock type S motor, I/H/E, plus K pro. i believe the cam will come with the flash(hondata) later on.

 

well so the cams is decent. but nothing spetacular. people are getting 220-225 whp and 155-160 ft-lbs on I/H/E, kpro...