FS:NJ K20A3 block and head RSX base
Thread Starter
Honda-Tech Member
Joined: Jun 2000
Posts: 389
Likes: 0
From: Milltown, NJ, USA
FS:NJ K20A3 block and head RSX base
Motor and head have 19000 miles on it. Can furnish Vin number on request, but would have to open up shipping crate to do so. .
I was going to rebuild it and swap in an EG, but decided to go more mainstream with B-series swap instead.
Head includes: All valves and springs installed with cams and all retainer bolts and caps installed, Needed to remove cam caps and cams for removal of head from block for block inspection. Does NOT include: manifolds, valve cover or sensors but do have timing chain guides.
Block includes crank, pistons, rods and oil pan still installed. NO WATER PUMP. Oil pan HAS NOT been removed for inspection, but NONE of the cylinder liners are scorn, and there was NO metal in the oil when it was drained.
Asking $650 including shipping to lower 48. Or $500 picked up in 08850. Is immediately for pickup or shipping. And will be shipped within 72 hours of payment truck freight paid (to business address, residential address may add $50 depending on location).
Will negotiate trade for the following items:
Complete LS head (built or stock), B20 Shortblock B or Z, B16 or B18C longblock, YS1 cable trans with LSD(4.26 final drive or 4.40 final drive), or S1 cable trans.
I was going to rebuild it and swap in an EG, but decided to go more mainstream with B-series swap instead.
Head includes: All valves and springs installed with cams and all retainer bolts and caps installed, Needed to remove cam caps and cams for removal of head from block for block inspection. Does NOT include: manifolds, valve cover or sensors but do have timing chain guides.
Block includes crank, pistons, rods and oil pan still installed. NO WATER PUMP. Oil pan HAS NOT been removed for inspection, but NONE of the cylinder liners are scorn, and there was NO metal in the oil when it was drained.
Asking $650 including shipping to lower 48. Or $500 picked up in 08850. Is immediately for pickup or shipping. And will be shipped within 72 hours of payment truck freight paid (to business address, residential address may add $50 depending on location).
Will negotiate trade for the following items:
Complete LS head (built or stock), B20 Shortblock B or Z, B16 or B18C longblock, YS1 cable trans with LSD(4.26 final drive or 4.40 final drive), or S1 cable trans.
Honda-Tech Member
Joined: Apr 2000
Posts: 992
Likes: 0
From: USA
Re: FS:NJ K20A3 block and head RSX base (jasyatz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jasyatz »</TD></TR><TR><TD CLASS="quote">Motor and head have 19000 miles on it. Can furnish Vin number on request, but would have to open up shipping crate to do so. .
I was going to rebuild it and swap in an EG, but decided to go more mainstream with B-series swap instead.
Head includes: All valves and springs installed with cams and all retainer bolts and caps installed, Needed to remove cam caps and cams for removal of head from block for block inspection. Does NOT include: manifolds, valve cover or sensors but do have timing chain guides.
Block includes crank, pistons, rods and oil pan still installed. NO WATER PUMP. Oil pan HAS NOT been removed for inspection, but NONE of the cylinder liners are scorn, and there was NO metal in the oil when it was drained.
Asking $650 including shipping to lower 48. Or $500 picked up in 08850. Is immediately for pickup or shipping. And will be shipped within 72 hours of payment truck freight paid (to business address, residential address may add $50 depending on location).
Will negotiate trade for the following items:
Complete LS head (built or stock), B20 Shortblock B or Z, B16 or B18C longblock, YS1 cable trans with LSD(4.26 final drive or 4.40 final drive), or S1 cable trans. </TD></TR></TABLE>
Jeff is one of the most honest, legitimate people on this board. Ask anyone who knows him.
Bump for him.
Anthony "Mario" Crea
I was going to rebuild it and swap in an EG, but decided to go more mainstream with B-series swap instead.
Head includes: All valves and springs installed with cams and all retainer bolts and caps installed, Needed to remove cam caps and cams for removal of head from block for block inspection. Does NOT include: manifolds, valve cover or sensors but do have timing chain guides.
Block includes crank, pistons, rods and oil pan still installed. NO WATER PUMP. Oil pan HAS NOT been removed for inspection, but NONE of the cylinder liners are scorn, and there was NO metal in the oil when it was drained.
Asking $650 including shipping to lower 48. Or $500 picked up in 08850. Is immediately for pickup or shipping. And will be shipped within 72 hours of payment truck freight paid (to business address, residential address may add $50 depending on location).
Will negotiate trade for the following items:
Complete LS head (built or stock), B20 Shortblock B or Z, B16 or B18C longblock, YS1 cable trans with LSD(4.26 final drive or 4.40 final drive), or S1 cable trans. </TD></TR></TABLE>
Jeff is one of the most honest, legitimate people on this board. Ask anyone who knows him.
Bump for him.
Anthony "Mario" Crea
Thread
Thread Starter
Forum
Replies
Last Post
Nathan@Spark
For Sale
12
Sep 29, 2007 01:47 PM
