snoflake put bc4's in his car yesterday , heres a little sound clip , sounds so ******* nice .
http://www.we-todd-did-racing....DE%3D

 

delicious

 

now let's here it off the header..
good shi*

 

stay tuned for the clip with his headertech

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DEVIOUS_EF* &raquo;</TD></TR><TR><TD CLASS="quote">now let's here it off the header..
good shi* </TD></TR></TABLE>

yes stay tuned......tunin soon and get all the bus out.....so far i love the lobe and the low and mid range is nice but cant tell it all till tuned

 

 

sounds like a rap beat

 

Sounds nice!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ekay_jeremy &raquo;</TD></TR><TR><TD CLASS="quote">sounds like a rap beat </TD></TR></TABLE>
im still trying to figure which one too......

but yea guys i set the timing at 14 and mang its rips like a *****...cant wait to tune it

 

what compression are you runnin on the motor? BTW sounds nasty

 

Run like 18 at idle and it wont be so lopey. Your going to love them

 

dam man sounds mean

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tbone &raquo;</TD></TR><TR><TD CLASS="quote">Run like 18 at idle and it wont be so lopey. Your going to love them </TD></TR></TABLE>

but im on 91 oct.....

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMlyfestyle &raquo;</TD></TR><TR><TD CLASS="quote">what compression are you runnin on the motor? BTW sounds nasty </TD></TR></TABLE>

not sure 100% BUT ABOUT 12:5

 

18 degrees at idle not base at 18.. I'm assuming you have some sort of engine management? If so set the values in colums 1-2 to 18 degrees below 1000 rpm

 

Mmmm

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tbone &raquo;</TD></TR><TR><TD CLASS="quote">18 degrees at idle not base at 18.. I'm assuming you have some sort of engine management? If so set the values in colums 1-2 to 18 degrees below 1000 rpm</TD></TR></TABLE>

waiting on tuning still......might go AEM EMS...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LSVTEC 91 Civic &raquo;</TD></TR><TR><TD CLASS="quote">Mmmm</TD></TR></TABLE>

Did I say something wrong?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tbone &raquo;</TD></TR><TR><TD CLASS="quote">

Did I say something wrong?</TD></TR></TABLE>

no you didnt dontmind him y0!
you and me i htink are the first to rock these BC 4's no?

 

what cam has more power than the BC4's? (IF any)

 

nice.... Whats your setup?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H.A.R.T B18C1EG6 &raquo;</TD></TR><TR><TD CLASS="quote">nice.... Whats your setup?</TD></TR></TABLE>

LsVtec
84.5 RS sleeves
Arias dome pistons final comp about 12:5
eagle rods
JG full race P&P milled 40 thou, Chambers welded closed, ITR valves, JF springs/retainers.
BUddy CLub IV cams
AEBS IM, HONDATA gasket
Header-tech header
stll untuned

 

Nice setup!

I waiting on my set, hopefully they will do well in my H1 motor.

 

up for the dope *** techno beat!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ekay_jeremy &raquo;</TD></TR><TR><TD CLASS="quote">up for the dope *** techno beat!</TD></TR></TABLE>

um bop um bop um bop

 

Is that car an everyday driver for you, how do the BC4's do in the long run, or are they for more of a track setup. Sounds down right mean.