FS: Sleeved B18C1 Block, JDM B16 Hydro LSD Tranny (Nebraska)
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 1,053
Likes: 0
From: Omaha, Nebraska, United States
FS: Sleeved B18C1 Block, JDM B16 Hydro LSD Tranny (Nebraska)
Block:
Darton Sleeved GSR Block (B18C1)
Step Decked
Bored .20 Over (1.85 Ltr)
Crower Steel Billet Rods (Not Econo)
ARP Connectors throughout
Stock GSR Crank (Micropolished)
Stock GSR Oil Pan (Tapped for Return Line)
Motor built by Chad @ 3D Motorsports in the Omaha, NE area.
Piston in cylinder number 2 was fried. Picked the whole car up for dirt cheap, so now I need to get rid of this. No noticeable cylinder damage. Needs new pistons/rings and possibly a fresh hone. Will have pics up as soon as possible. Looking to get $1,400.00 Complete + Shipping (Would rather have local pickup). I will try and post all information from the builder as possible (as I bought a car with this in it, and I dont need it) so I dont know all information as of yet.
____________________________________________
Tranny:
JDM B16 Tranny (4.4 Final Drive)
Factory LSD
Hydraulic
Less than 50k on it (swap completed in June, put 8k on it, from hmotors)
*No Grinds*
Looking to get $1,100.00 OBO + Shipping.
____________________________________________
Located in Omaha, NE. Drop me an email @ carlton585@aol.com, or just pm me, as I check those as often as daily or more. Thanks for looking, and if you read this, bump it up please!
Modified by carlton585 at 11:55 AM 12/20/2004
Darton Sleeved GSR Block (B18C1)
Step Decked
Bored .20 Over (1.85 Ltr)
Crower Steel Billet Rods (Not Econo)
ARP Connectors throughout
Stock GSR Crank (Micropolished)
Stock GSR Oil Pan (Tapped for Return Line)
Motor built by Chad @ 3D Motorsports in the Omaha, NE area.
Piston in cylinder number 2 was fried. Picked the whole car up for dirt cheap, so now I need to get rid of this. No noticeable cylinder damage. Needs new pistons/rings and possibly a fresh hone. Will have pics up as soon as possible. Looking to get $1,400.00 Complete + Shipping (Would rather have local pickup). I will try and post all information from the builder as possible (as I bought a car with this in it, and I dont need it) so I dont know all information as of yet.
____________________________________________
Tranny:
JDM B16 Tranny (4.4 Final Drive)
Factory LSD
Hydraulic
Less than 50k on it (swap completed in June, put 8k on it, from hmotors)
*No Grinds*
Looking to get $1,100.00 OBO + Shipping.
____________________________________________
Located in Omaha, NE. Drop me an email @ carlton585@aol.com, or just pm me, as I check those as often as daily or more. Thanks for looking, and if you read this, bump it up please!
Modified by carlton585 at 11:55 AM 12/20/2004
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 1,053
Likes: 0
From: Omaha, Nebraska, United States
Re: (carlton585)
bump, dont be skeered to make offers....any trades for rims/tires that will fit a DA for the block? aftermarket things? willing to make trades on the block........
Trending Topics
haha small world
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 1,053
Likes: 0
From: Omaha, Nebraska, United States
Re: (hp80)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hp80 »</TD></TR><TR><TD CLASS="quote">The swap is complete from Hmotorsonline, mounts, sensors, axles, etc? </TD></TR></TABLE>
what swap? the tranny is all i am selling. the motor that came with the swap is gone.
the block is a seperate piece.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tony Starks »</TD></TR><TR><TD CLASS="quote">Any info on the builder yet?</TD></TR></TABLE>
what do u need to know? i know it was built by chad @ 3dmotorsports here locally. he will verify all parts/labor/etc were done. althought the pistons/rings WERE FRIED . . . .block is still in usuable shape with a fresh hone/new pistons.
what swap? the tranny is all i am selling. the motor that came with the swap is gone.
the block is a seperate piece.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tony Starks »</TD></TR><TR><TD CLASS="quote">Any info on the builder yet?</TD></TR></TABLE>
what do u need to know? i know it was built by chad @ 3dmotorsports here locally. he will verify all parts/labor/etc were done. althought the pistons/rings WERE FRIED . . . .block is still in usuable shape with a fresh hone/new pistons.