whta is the engine code for a DOHC ZC motor. Ive been looking for this and cant find it. Im going to a junkyard that has specuials for any motor for 70$ like once every 3 months and i want a DOHC ZC to build and turbo over the summer. Dont get excited they dont have high end motors like GSR or B16. D series is common and some ls's with like 100000937089165 miles. But i was wondering if you guys could tell me some info and help me out one building this ZC or if i should go to a different motor for turboing. I wanna go as cheap as possible while maintaining quality. Also do u guys think i could trade a running 89 DX STock rusty CRx in the spring for a SI shell with everything but motor and tranny?

 

JDM=ZC
USDM= D16A8 and D16A9
Matt

 

Engine code for a ZC is ZC...A real ZC bolt in
Dont get it confused with the 87-89 1.6 dohc integra motor ..it's not the same..This motor will not bolt in..
I doubt you'll find a zc at a junkyard unless someone swaped it in 1st..
Hmotorsonline.com sells them for $500......

I know a junkyard in NJ with a wrecked crx that has a dohc zc in it..
Kid swapped in the motor and wrecked it...Its white and in the back..
THe Junkyard also has a JDM crx SIR..original b16,,it also has a rollcage and some extras..guy want $5000..

Absolute Auto Salvage
Mtn & South Ave
Middlesex, NJ 08846
Phone: (732) 469-2202 (Ask for bill or ish.)

 

yeah, the engine code for a ZC is...."ZC". You'll see "ZC" stamped on the block if it's a ZC motor. I wouldn't go to a junkyard looking for a JDM motor though...that's kinda...well, dumb (unless you know a kickass junkyard that usually has ZC motors laying around in cars for you to pull out).

As far a turbo setup on a motor...you want cheap? Maybe forced induction isn't for you. If you didn't know the engine code for a ZC motor, then i doubt you have what it takes to turbo a Honda and get it done right...no offense or anything.

...I could just picture somebody not having a good grasp on automotive technology, attempting not only to turbo a vehicle, but ALSO attempting to turbo a vehicle being as cheap as possible....lol.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by smaxnz &raquo;</TD></TR><TR><TD CLASS="quote">JDM=ZC
USDM= D16A8 and D16A9
Matt</TD></TR></TABLE>

Correction:

JDM- ZC Anything from a carbed 1.6 DOHC to a FI 1.6 DOHC to a VTEC 1.6 SOHC all stamped with ZC jst depending on the year and model car they're in.

USDM- D16a1 from the 86-89 Integra

EDM- D16a8/a9 same as the JDM 1.6 DOHC

 

thanks for your input guys, and for the flammer its not that i dont know what im talking about when it comesto boosting its just that im not into hondas. I had a 240SX and now have a 300ZX and as a beater got a CRX. My friend has a DOHC D16 non vtec from an inteagra he said i shoul put in he said its similiar to a ZC and i was wondering wehat a ZC is. Also what work is required to put the integra motor in? i got most of the part i need from old stuff i got from the nissans like turbos and intercooler (starion) etc. I just figured that id ask for some helpful advice seeing how a newbie. Some of you guys are homo's though.... peace honda tech here i come home made turbo..........

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by #1nismo &raquo;</TD></TR><TR><TD CLASS="quote">thanks for your input guys, and for the flammer its not that i dont know what im talking about when it comesto boosting its just that im not into hondas. I had a 240SX and now have a 300ZX and as a beater got a CRX. My friend has a DOHC D16 non vtec from an inteagra he said i shoul put in he said its similiar to a ZC and i was wondering wehat a ZC is. Also what work is required to put the integra motor in? i got most of the part i need from old stuff i got from the nissans like turbos and intercooler (starion) etc. I just figured that id ask for some helpful advice seeing how a newbie. Some of you guys are homo's though.... peace honda tech here i come home made turbo.......... </TD></TR></TABLE>

jeez you sound like a ***. I "flamed" you because you deserved it i suppose. You didn't seem to know anything about honda motors.

 

where are you located Ill have a crx si shell in about a month if anyone wants it

 

im upstate ny like 40 minutes south of syracuse