I'm going to soon be doing a coilover install on my '92 S and am not wanting to mess with the ball joints on the rear A-arms, but am rather going to unbolt the rear upper A-arm by the 2 bolts from the interior of the trunk. I can get to the 2 bolts on the passenger side, but when looking in my Helms on removing the driver's side rear seat, there's supposed to be a latch to pull inbetween the top of the base of the seat and the bottom of the back of the seat - at the seam. I can't seem to find this, and I've tried pulling back and digging around. Has anyone else taken their seat out before or know of another way to get to the bolt?

 

That latch is there, you gotta find it, its dead center in the middle of each side (if that makes any sense)...

You gotta pull it, the first time its a pain in the ***, but after that it comes out easily..

 

what do you mean on each side? just one tab right?

 

two tabs for each seat. One on each side. Pull hard (but dont break them)

Good Luck