what is the spec's on the 1st gens. integra?

and how fast are they.

 

Is there a g1 Integra sale going on? This has been asked 3 times in the last 24 hours.

For specs, go to http://www.g1teg.org, they have all of the info you could ever need.

All of the g1s use a d16a1 DOHC (non-vtec) engine. The 1986-87 ones have 113hp and 99 ft/lbs of tq, while the 88-89 has 118hp/103tq, so I am guessing they are capable of high-16 second 1/4 miles.

 

How fast are they???
0-60 qrt mile
1986 Acura Integra RS 9.3 17.0
1986 Acura Integra LS 8.8 16.5
1989 Acura Integra LS 9.3 17.1

NOT VERY...but cool none the less.

 

thanks.damnnn 17's....i went from a 13sec car to a 17sec. wow. all good i was looking for a daily driver and i found one...

now lets talk about mods...iim gonna need alittle power for thie little beast.
this is what i want. i still want that stock look but i might want to put a cold air Induction..what else should i put on..

 

You had a 13 second car but you're asking us how to mod a car?

 

i have a Mustang and i did all the bolt ons and gears...
im just asking what you guys think i should put into it without putting too much money into it. thanks.

 

Honestly if it's your daily, don't do anything to the engine. Unlike a Mustang there's nothing really low buck you can do that will make a big difference. If you find a really cheap deal on I/H/E then maybe do that. But still to me that is a waste of money and I don't like putting cheap parts on my car just so I can say it's modded.

If you want to spend money on it I would first get everything running top notch and then take a look at the suspension. Nice tires, springs, shocks, bushings, and a rear anti roll bar will make the car a lot more fun than engine mods for the same price.