Well, here's some quick pics of Project Boosted EM1. It was starting to get dark so the pics aren't the greatest. For you bodykit haters.....zip it.

What intercooler? Painted with high temp flat black


Autometer Cobalt series Boost, Oil, Fuel and Egt gauges



I found this and thought it was fitting.


Engine bay shot. Dirty, I know. Cleaning this weekend


Hair Dryer with mesh (waiting on my slim fans so I have room to run a filter)


My EGT probe sticks in through the internal wastegate hole of the turbo. I just drilled and threaded the exhaust flange


Oil return fitting welded into the pan with high temp black paint to stop rust


Tial BOV. The other silver thing is my compressor for my air horn you can see there too.


My jerry rigged injector clips. Had to put the stock injectors back in after learning my stock ECU can't handle RC 550's . Instead of soldering I just put those connectors on. Work good so far. Replacing stockers with the 550's tomorrow though (have a chipped P72 running Uberdata now)


AEM FPR and rail


Golden Eagle vacuum manifold (I LOVE this thing)


2.5" exhaust. Notice no muffler. (Magnaflow 2.5" is in the mail) The stupid red light is needed because of portuguese law.

 

TURBO

 

straight pipes 0wn j00!!!


sweet setup man!

 

nice setup..but i would recommend a full size filter..

my mesh screen filter stuff gave me slower spool up time vs. full size filter

 

nice setup

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2+2=5 &raquo;</TD></TR><TR><TD CLASS="quote">nice setup..but i would recommend a full size filter..

my mesh screen filter stuff gave me slower spool up time vs. full size filter</TD></TR></TABLE>

Waiting on my slim fans so I have enough room in there.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ^gods0n &raquo;</TD></TR><TR><TD CLASS="quote">TURBO </TD></TR></TABLE>

 

engine setup.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IslandSi &raquo;</TD></TR><TR><TD CLASS="quote">2.5" exhaust. Notice no muffler. (Magnaflow 2.5" is in the mail) The stupid red light is needed because of portuguese law.
</TD></TR></TABLE>

What is this about?

 

Not too bad....TURBO baby!! Darkside representing!

 

I like the turbo kit. Numbers?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HybridHatch88 &raquo;</TD></TR><TR><TD CLASS="quote">What is this about?</TD></TR></TABLE>

Reading is the key. Portuguese law.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Louie_EM1 &raquo;</TD></TR><TR><TD CLASS="quote">I like the turbo kit. Numbers?</TD></TR></TABLE>

No numbers yet. I'm on a damn 8x11 island in the middle of the atlantic. The closest dyno is about 2200 miles west of here. I'm uberdata'ing it for now to keep her running safe. But she will spin 1st, 2nd and chirp 3rd without any problem.

 

TEINS

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IslandSi &raquo;</TD></TR><TR><TD CLASS="quote">

No numbers yet. I'm on a damn 8x11 island in the middle of the atlantic. The closest dyno is about 2200 miles west of here. I'm uberdata'ing it for now to keep her running safe. But she will spin 1st, 2nd and chirp 3rd without any problem.</TD></TR></TABLE>


Do you get people asking you questions like...
"if you were on an island and could pick one thing what would it be?"

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rocks &raquo;</TD></TR><TR><TD CLASS="quote">TEINS </TD></TR></TABLE>

SS's all the way. Nice catch.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Louie_EM1 &raquo;</TD></TR><TR><TD CLASS="quote">Do you get people asking you questions like...
"if you were on an island and could pick one thing what would it be?"</TD></TR></TABLE>
I'd have to say Wal Mart.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Shakes &raquo;</TD></TR><TR><TD CLASS="quote">lookin nice jan. take that bitch out on the tarmac </TD></TR></TABLE>
Already took it out on the 4 lane highway we have here. She's MEAN.

 

lookin nice jan. take that bitch out on the tarmac

 

Cheap bump because I'm so damn happy that this thing is finally finished.

 

phat ride... pretty nice setup... ARG on you for haveing a turbo badge! i want one of those.

 

some of that appearance stuff is questionable... but very dope motor work

 

dam this is tight POrtuguese WOOT WOOT My paretns are from SAo Jorge

 

I dont get why you would paint the intercooler black to "hide it", but then put a turbo badge on the back!?!?!!?!?

nice motor by the way

 

nice indeed

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STEV3-O &raquo;</TD></TR><TR><TD CLASS="quote">dam this is tight POrtuguese WOOT WOOT My paretns are from SAo Jorge </TD></TR></TABLE>

I can SEE Sao Jorge and Pico from here on a clear day.

 

wouldnt that filter you have on your intake pipe leak out boost??