OK, so I bought a dizzy for my z6 swap
http://cgi.ebay.com/ebaymotors...%3AIT

I recieved it in good condition, even sent me the stock coil. What do I need to do to convert this back to stock? and where the hell does the stock coil go? I've got my stock dizzy from my d15b, I'm thinking I can just use some of the parts out of it, I'm also thinking I'm a dummy for buying it period, but I am not sure if I can use the dizzy off my 1.5 for the 1.6......someone help me out here. All I need now is some new radiator hoses and someone to help me do the swap.

THANKS IN ADVANCE!


Modified by Pioneer162 at 10:27 AM 11/12/2004

 

bizzump

 

why the dsm ignition system?

the stock coil goes inside the dizzy

hard to see what ur tryin to do without pictures.......

and that dizzy cap was changed in order to use a external coil.

 

ok, I'll get pix of what I got when I get home

I took apart the dizzy last night when I got it. I got the cap off, but then I wasn't sure how to take off the 'rotor' on the inside, that's holding down the plastic cover on the inside, so I'd figure I'd wait to ask the experts on how....I'll have pix up in a few hours.

thanks again