HEY GUYS I DID A SEARCH BUT I DID NOT LOCATE WHAT I WAS LOOKING FOR..I AM LOOKING FOR INSTRUCTIONS ON HOW TO DO THE WIRING ON AN 88 DX HATCH..I ALREADY HAVE THE MOTOR IN THE CAR,BUT I WAS TOLD THE WIRING WAS THE SAME AS A ZC BUT I WANTED TO BE SURE...PLEASE ANY INFO IS WELCOMED..THANKS..RON

 

It should plug right in an '88 DX is OBD0 too right?

 

you are right about the obd0...but the DX id dual point fuel injection.and the LS is MPFI...so my question is do i just wire in the other 2 injectors to my existing DX harness or what..?..i have done a b-16 swap in a dx,but we used the hasport harness,and a few ZC swaps,but never an LS...so all i need is the wiring instructions on the fuel injectors..?..i know i have to wire in a injector resitior pack,but thats as far as it goes...thanks..Ron

 

hope this helps:

http://tech.hybridgarage.com/t...g.htm

 

it's just like ZC, except you also need to swap the round distributor plug on.