Fs: B16 head/tranny, CTR pistons, Powerbelt, HCP, Exedy, so cal!
Thread Starter
Member
Joined: Feb 2002
Posts: 3,893
Likes: 0
From: Left Coast., CA, usa
Fs: B16 head/tranny, CTR pistons, Powerbelt, HCP, Exedy, so cal!
Built B16 head (contains the following)
-Decked, 3-angle vavle job, gasket matched. tested and hot tanked.
-Toda Dual Valve Springs
-Skunk2 Hi-comp valves
-Portflow Retainers
-Honda valve seats
-Stock PR3 cams w/ stock cam gears w/ be included. (not recommend that u run them, but ill throw them in.)
No valve cover, never had one. Still in the bag from the shop, this is a older PR3 head, year=1990. but IT IS brand new with this rebuild. $1000. (NEW lowered price!)
work was done at Speed-o-motive in west covina, more of a domestic car shop, but starting to do imports, friend works there so yeah.
in the bag still, will be opened to take pics.
most of the head.
dykem? haha..ok
showing the portflow retainers, and the toda valve springs are obviously under those.
bling!
JDM J1 B16 CABLE tranny. bought off another HT member, never got a chance to use it, heard it grinds third in high rpms, but what cable b16 doesnt? im asking $350 firm picked up. no pics yet.
Power Enterprise Timing belt, used for a bit..never by me, for GSR, but can run in any b-series as long as u run GSR water pump (thats what i was told) $50! firm
Exedy Stage 1 clutch (contains the following)
-Exedy Pressure plate
-Exedy stage 1 clutch
-Throwout bearing, pilot bearing, alignment tool. $230 firm.
organic clutch.
bling pressure plate.
HCP mounts for B-series in ef (not hasport, from what ive been told.), painted crinkle paint black. red bushings in it. $200 firm w/ rear bracket.
98' Spec ITR Intake cam and 98' GSR Exhaust cams, $300
intake.
exhaust.
CTR Pistons, OVERSIZED, w/ rings SOLD!. brand new.
96' GSR front brakes w/ knuckles, calipers, great condition... bottom balljoint bolt a bit stripped, can re-thread or replace. other then that...nothing wrong. Best offer
thats it for now..... also got CRX items from other posts up for grabs.
CRX Brand new hatch shocks, work great, like stock (got them on my car, no noise!) $40!
Located in so cal, so pick them up so I can use the money for parts on my bike!
new items:
Spoon Crane stickers, best offer please.
NEW AEM bypass valve, blurry pic, not sure what size, gotta check later. best offer
13" Mugen CF-48's, SET OF THREE only. White(original color) $250 firm now thats cheap!
B&M Short Shifter, used but in great condition, real strong. $40 shipped!
OEM honda jacks from japan, not brand new but only $5 each w/ no tools, sizes small or big.
LOWERED PRICES!!! NOW BUY THEM!!
Modified by xpsonic at 1:16 AM 12/2/2004
Modified by xpsonic at 3:16 PM 12/31/2004
Modified by xpsonic at 12:03 PM 1/3/2005
Modified by xpsonic at 2:01 PM 1/6/2005
Modified by xpsonic at 6:26 PM 1/9/2005
-Decked, 3-angle vavle job, gasket matched. tested and hot tanked.
-Toda Dual Valve Springs
-Skunk2 Hi-comp valves
-Portflow Retainers
-Honda valve seats
-Stock PR3 cams w/ stock cam gears w/ be included. (not recommend that u run them, but ill throw them in.)
No valve cover, never had one. Still in the bag from the shop, this is a older PR3 head, year=1990. but IT IS brand new with this rebuild. $1000. (NEW lowered price!)
work was done at Speed-o-motive in west covina, more of a domestic car shop, but starting to do imports, friend works there so yeah.
in the bag still, will be opened to take pics.
most of the head.
dykem? haha..ok
showing the portflow retainers, and the toda valve springs are obviously under those.
bling!
JDM J1 B16 CABLE tranny. bought off another HT member, never got a chance to use it, heard it grinds third in high rpms, but what cable b16 doesnt? im asking $350 firm picked up. no pics yet.
Power Enterprise Timing belt, used for a bit..never by me, for GSR, but can run in any b-series as long as u run GSR water pump (thats what i was told) $50! firm
Exedy Stage 1 clutch (contains the following)
-Exedy Pressure plate
-Exedy stage 1 clutch
-Throwout bearing, pilot bearing, alignment tool. $230 firm.
organic clutch.
bling pressure plate.
HCP mounts for B-series in ef (not hasport, from what ive been told.), painted crinkle paint black. red bushings in it. $200 firm w/ rear bracket.
98' Spec ITR Intake cam and 98' GSR Exhaust cams, $300
intake.
exhaust.
CTR Pistons, OVERSIZED, w/ rings SOLD!. brand new.
96' GSR front brakes w/ knuckles, calipers, great condition... bottom balljoint bolt a bit stripped, can re-thread or replace. other then that...nothing wrong. Best offer
thats it for now..... also got CRX items from other posts up for grabs.
CRX Brand new hatch shocks, work great, like stock (got them on my car, no noise!) $40!
Located in so cal, so pick them up so I can use the money for parts on my bike!
new items:
Spoon Crane stickers, best offer please.
NEW AEM bypass valve, blurry pic, not sure what size, gotta check later. best offer
13" Mugen CF-48's, SET OF THREE only. White(original color) $250 firm now thats cheap!
B&M Short Shifter, used but in great condition, real strong. $40 shipped!
OEM honda jacks from japan, not brand new but only $5 each w/ no tools, sizes small or big.
LOWERED PRICES!!! NOW BUY THEM!!
Modified by xpsonic at 1:16 AM 12/2/2004
Modified by xpsonic at 3:16 PM 12/31/2004
Modified by xpsonic at 12:03 PM 1/3/2005
Modified by xpsonic at 2:01 PM 1/6/2005
Modified by xpsonic at 6:26 PM 1/9/2005
Trending Topics
Honda-Tech Member
Joined: Oct 2004
Posts: 483
Likes: 0
From: CA
Re: Fs: B16 head/tranny, CTR pistons, Powerbelt, HCP, Exedy, so cal! (xpsonic)
i have a 91 hatch with the obd 1 jumper harness and with a jdm d15b lookin for a trage for stock civic or integra willin to trade parts
Thread Starter
Member
Joined: Feb 2002
Posts: 3,893
Likes: 0
From: Left Coast., CA, usa
Re: Fs: B16 head/tranny, CTR pistons, Powerbelt, HCP, Exedy, so cal!
pms answered, no probs with header at all...brand new never mounted or even messed with. im interested int hat obd0 to obd1 jumper does it come with ecu too? lemme kno a price or what parts u are willing to trade for it. later