FS
<U>
JE 83mm pistons
Eagle Rods</U>
SOLD!
came out of a b18b, ran for 2 months.

$450shipped obo
i need these gone FAST. hurry peeps
SOLD!



Modified by _Chemik_ at 10:31 PM 11/17/2004


Modified by _Chemik_ at 10:32 PM 11/17/2004

 

whats the compression?bore?

 

cant use the pistons. will you sell just the rods???

 

sorry to jump in, but i wouldnt trust this guy. he blatantly lied about a block for 4 pages in the allmotor forum saying that its a resleeved 84mm. appearently it isint because he is selling the 83mm pistons right here..

https://honda-tech.com/zero...age=1

 

hhhhhmmmmmmmmmmmmmm

 

man people dont have lives. apparently theyre psychics too. I was selling a block I bought from a buddy and didnt knowmuch about it. he told me it was 84mm so I didnt doubt it since I knew him. I posted with the specs the guy told me, then everyone got on there accusing me of lying and this and that. I pulled it off of here since everyone made me look stupid so I sold the bare block locally, when i took the rods and pistons out I had them measured and it turns out that they are 83mm, the old thread went on forever cuz everyone was busy flaming me. I already said im not out to rip people off before but apparently everyone that is flaming me is so sure im a thief cuz theyre psychic or somethin. no one is putting a gun to anyone and forcing them to buy anything. If these people reallyknew me they would know Im an honest person. you can even look at my ebay feedback to see what people that have done business with me say about me. the stuff is still for sale and if people are unsure I can do a buyitnow on ebay so the transaction is all documented. my ebay ID is : chemik!

 

bullshit... He said he measured them at 84mm in that same thread posted above... kthx gg ch3mik you can't stop, can ya?

 

rods sold! pistons remain $230 obo

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by _Chemik_ &raquo;</TD></TR><TR><TD CLASS="quote">haha, ok mr safety patrol. are you a mod anyways? I NEVER said i used a mic to measure it.</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by _Chemik_ &raquo;</TD></TR><TR><TD CLASS="quote">he didnt even know it was bored out til I measured the pistons about 3 weeks ago.</TD></TR></TABLE>

I like how u lie and then tell everyone I'M the "little boy"

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by _Chemik_ &raquo;</TD></TR><TR><TD CLASS="quote">SO JUST CUZ I MISREPRESENTED SOMETHING ONCE</TD></TR></TABLE>

No, u didn't "misrepresent" anything, you ******* lied. And then you went ON and ON about how the people who called bullshit on you were "haters" and that you measured the sleeves and they were 84mm and had stock thickness and ON and ON... and then you were stupid and proved YOURSELF wrong and I called you out on it and now I'M the bad guy and you start whining like this:

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by _Chemik_ &raquo;</TD></TR><TR><TD CLASS="quote">WHAT THE HELL DO YOU WANT ME TO DO NOW? ITS DONE . TELL ME. WHAT DO YOU WANT ME TO FREAKING DO! YOURE PISSING ME OFF. YOURE TAKING THIS WAY TOO FAR. IM A NICE GUY BUT YOURE JUST BEING A DICK! DAMN.WHAT MORE DO YOU WANT ME TO SAY. MAN I SHOULDA LISTENED TO PEOPLE THAT TOLD ME TO NOT GET ON HONDA-TECH BECAUSE PEOPLE THERE WERE A LOT OF ******** ON HEREAND YOU ARE ONE OF THEM</TD></TR></TABLE>

Ladies and Gentlemen, with his new latest single, here's Justin Timberlake with "Cry Me a River"...
boo hoo. You don't like H-T cuz we're MEAN to you... WAAAAAHHHHHHHHH WAAAAAAHHHHHHH.

You deserve a lot more than people "being mean" to you for trying to scam someone over a block.

I also love how you say: "IM A NICE GUY BUT YOURE JUST BEING A DICK" lol. How do you consider scammers "NICE GUYS"???

Once again, you're done. game over. Stop trying to defend yourself because you just end up stacking a lie on top of the old one.

IT'S OVER.

 

sale pending. waiting on paypal.

 

SOLD!!! THANKS GUYS!! IM GLAD TO SEE NOT EVERYONES A DICK LIKE WHO WE SEE ON HERE TALKING CRAP

 

Once again, you fail to realize that's you're calling ME a dick for stating the truth and letting everyone know that you tried to scam the block off claiming it was darton ductile sleeved 84mm when it was OEM sleeved AND 83mm...

Did I mention that if you read up, I'm not the one that first jumped in and told everyone about your scam... it was johnzm. So it's not like I'm the sole person who witnessed your lies and called you out on it in your other sale threads.

You can cry all day long... Nobody's going to listen.

 

arf!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by _Chemik_ &raquo;</TD></TR><TR><TD CLASS="quote">arf! </TD></TR></TABLE>

Your true intelligence shows once again.

 

hahah. i knew you were going to say something along those lines. youre so predictable.

 

Oh, of course!!! And so are you... I predict... That the next time you say something about a car or part that you own... It will be filled with lies!!!

Damn I'm good.

 

hahahahah. man youre a funny guy. oh, ahaha. man. im laughin hard cuz youre so cool. youre such a cool-arrow.

 

Where did I ever say I was cool? You brought up being predictable...

I'll tell ya what, I'd rather be predictable than a scammer.

This **** is done man, let it go.