My old man and his dometic freinds had a track rental so i tagged along in my 2001 GSR with 97 JDM ITR motor I/H/E. The track is on top of a mountin and has an elevation of 630 ft (not that bad), but the track its self isnt level, its up hill. Not to mention everyone there imports and domestics had the worst problems hooking up. I usually go to Atco or englishtown, as being im in NJ. So I decided to get a couple of runs in, the only problem was i had no slicks or radials, but ive pulled off 13.9s at Etown on street tires. Not here, my best pass was a 14.57 on street tires.
I did make two passes with someone elses slicks earlier in the day and hit 13.89, and 14.06 but still had spinning off the line and hitting second gear.

Here is my 14.57 time slip:

RT....627
60....2.269
330..6.213
660..9.465
MPH..76.21
1000 12.230
1/4...14.573
MPH..97.63

 

I used to say the same thing.... but then again last Sunday I did a 1.48 60' time there

 

Where is this track anyways.. Never been there

 

Beaver Springs Pa, about 4 hours from toms river, nj

 

Dayum, for 4 hours, mind as well hit up Maple Grove.

 

do you know the relation maybe from reading, PA to this track?

 

HAHA...i cant believe im reading this post......HAHAHAHA!!!

Numidia Raceway is where it's at my friends...

And no kevin i dont work there anymore so im not advertising

 

i live 15 mins from maple grove! just wondering where this track is?

 

FYI...Numidia Raceway is about 1.5 hours directly north of Maple

 

Just look how safe this place is.....



if i got out of shape...i would want a guide rail closer than 15 feet from the track

 

thanks. never heard of that track before. "OT" I heard that maple grove may be putting a Road Course in. a girl i know, her unkle or someone in her family owns maple grove.


Modified by TyCooley at 11:38 PM 10/24/2004

 

It takes me like 2 hours and 15 minutes to get to maple grove. Id go there before i went anywhere besides etown or atco..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIXTYdashONE &raquo;</TD></TR><TR><TD CLASS="quote">It takes me like 2 hours and 15 minutes to get to maple grove. Id go there before i went anywhere besides etown or atco..</TD></TR></TABLE>

here's some pictures taken at Numidia..the shut down area is the only thing that is uphill...unlike beaver springs..much better quality and this is an NHRA sponsored track..so it is approved by them and there is a Division 1 meet held there every year.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TyCooley &raquo;</TD></TR><TR><TD CLASS="quote">thanks. never heard of that track before. "OT" I heard that maple grove may be putting a Road Course in. a girl i know, her unkle or someone in her family owns maple grove.


Modified by TyCooley at 11:38 PM 10/24/2004</TD></TR></TABLE>


No way, where did you hear this from?? That would be ******* badass if its true

 

Hey Tyler, where exactly is that located? looks pretty damn nice

 

It's 15 min outside of Bloomsburg, PA...which is right off I-80

Not sure where you're from....but it takes me about 2.5 hours to get to etown from bloomsburg

 

maybe Kevin can come back in sometime and leave some comments about the track..he's been there in the past and I believe he likes it there

 

Hmm, ill look into it.... thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BoostingSnail &raquo;</TD></TR><TR><TD CLASS="quote">Just look how safe this place is.....



if i got out of shape...i would want a guide rail closer than 15 feet from the track </TD></TR></TABLE>

haha if you think that is unsafe you should try quaker city in salem ohio, if you leaned over the fence far ienough i bet you could touch the mirrors on the cars going by.

 

haha..well i ran my car at beaver springs once because it was a school event...but i rolled up to the beams.....pre-staged...rolled...staged.....and had my foot on the clutch and the other on the gas...and didnt the car roll through the beams with a redlight....all the other runs i had to preload the rear brakes so it didnt do that...real flat

 

here is my 13.8 pass

r/t /527
60 2.001
330 5.891
1/8 9.157
mph 78.84
1000 11.737
1/4 13.87
mph 99.27

 

Hey man I had the GSR hatch you rode in with slicks that day my best run with the slicks was

R/T .534
60 1.985
330 5.847
660 9.106
MPH 75.30
1000 11.916
1/4 14.288
MPH 94.40

 

Beaver springs is acutally an old airport and it is up hill 2 degrees..... here is the website... http://www.beaverspings.com

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboLude97 &raquo;</TD></TR><TR><TD CLASS="quote">Beaver springs is acutally an old airport and it is up hill 2 degrees..... here is the website... http://www.beaverspings.com </TD></TR></TABLE>

does that 2 degrees have any effect on ET