FS: 91 Integra LS Gen2 Rear Disc Brake Swap
Thread Starter
Moderator in Chief
iTrader: (2)
Joined: Sep 2001
Posts: 9,506
Likes: 7
From: Buffalo, NY
FS: 91 Integra LS Gen2 Rear Disc Brake Swap
I have the entire front and rear disc brake and suspension setup from a 91 Integra LS. This car was in premo condition before it got t-boned. No rust on any of the suspension or brake parts. There isnt even rust on the rotors!
Includes all knuckles, hubs, rotors, calipers, lca's, uca's, trailing arms, brake lines, cables, and bolts - everything you need to remove your suspension and swap this into your civic. Wheel bearings and bushings are even in good condition!
<u>Rotor Sizes</u>
Front Discs: Ventilated, 10.3" (262 mm) dia.
Rear Discs: Solid, 9.4" (239 mm) dia.
These are the same sizes as the Gen3 (94-01) Integra!
$125 for the front
$150 for the rear
or $250 for both
And no I cant include shipping for that price, it would be too much. Will ship anywhere at your expense.
Includes all knuckles, hubs, rotors, calipers, lca's, uca's, trailing arms, brake lines, cables, and bolts - everything you need to remove your suspension and swap this into your civic. Wheel bearings and bushings are even in good condition!
<u>Rotor Sizes</u>
Front Discs: Ventilated, 10.3" (262 mm) dia.
Rear Discs: Solid, 9.4" (239 mm) dia.
These are the same sizes as the Gen3 (94-01) Integra!
$125 for the front
$150 for the rear
or $250 for both
And no I cant include shipping for that price, it would be too much. Will ship anywhere at your expense.
Thread
Thread Starter
Forum
Replies
Last Post
RyanA
Mid-West (Sales)
3
Apr 12, 2009 04:53 PM
