d16y7 to d16y8

Reply Subscribe

Thread Tools

Search this Thread

Oct 18, 2004 | 04:01 PM

philcrxboy

Thread Starter

Joined: Nov 2003

Posts: 37

Likes: 0

From: philadelphia, pa, united states

d16y7 to d16y8

what parts would you need to do this conversion (non v-tech to v-tech)? and the steps for installation , thank you

Oct 18, 2004 | 04:09 PM

mat

Joined: May 2004

Posts: 142

Likes: 0

From: Gastonia, NC

Re: d16y7 to d16y8 (philcrxboy)

pretty sure it all just plugs up. 92 and up civic's harness's are already set up for vtec but don't use it.

and it's vtec dude

Oct 18, 2004 | 04:53 PM

StRacer

Honda-Tech Member

Joined: Sep 2002

Posts: 504

Likes: 0

From: Columbus, Ohio, United States

Re: d16y7 to d16y8 (mat)

Yea I was thinking about doing the mini me swap, just every write up i find for it is for the 92-95 civics and not the 96-00.

Oct 18, 2004 | 06:15 PM

shawn_crx

Honda-Tech Member

Joined: Sep 2003

Posts: 1,305

Likes: 1

From: TX

Re: d16y7 to d16y8 (StRacer)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by StRacer »</TD></TR><TR><TD CLASS="quote">Yea I was thinking about doing the mini me swap, just every write up i find for it is for the 92-95 civics and not the 96-00. </TD></TR></TABLE>

about the same steps as 92-95

Oct 18, 2004 | 06:31 PM

Calvinator

Honda-Tech Member

Joined: Jun 2004

Posts: 3,169

Likes: 0

From: Bay Area, California

Re: d16y7 to d16y8 (philcrxboy)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by philcrxboy »</TD></TR><TR><TD CLASS="quote">what parts would you need to do this conversion (non v-tech to v-tech)? and the steps for installation , thank you</TD></TR></TABLE>

Search on this board..there are lots of write ups on mini me swaps ( y7 to y8 swap)