whats the best lowering springs out there. any help is appreciated

 

Some of the most common are the Eibach prokit and the Espilers. You can typically get the Espilers over at s2ki.com for around $180. I know a few people with these and they perform very well.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JdmLude04 &raquo;</TD></TR><TR><TD CLASS="quote">whats the best lowering springs out there. any help is appreciated </TD></TR></TABLE>

KG/mm Springs

 

I personally really like my Eibach Pro-Kits.

 

thanks for all the good info what do yall think of the spoon progressive springs??? also the rsr ti2000 and the tein s techs?? and for the springs that were on s2ki i went to the marketplace on there and couldnt find them. thanks for all the help!

 

you talkin about the kg/mm race or kg/mm supersports also whats the difference?? thanks. tryin to figure out so i can order sometime this week to go with my spoon stuff

 

the espilers are on a group buy from evolution...kg/mm are very stiff i believe...

 

appreciate it everyone ordered espilers on s2ki hopin there as good as everyone says still kinda regretting not goin with spoon but everyone rocemmend and loved em so im goin to try em and see also were lookin at 180 shipped to 400 plus shippin for the spoons. i will post some pics up here as soon as i get that and my spoon x brace spoon rear tie and spoon front strut and resoiver covers and the espilers springs. if everything goes as plan and i love them (espilers) as much as everyone else next is the js racing rear upper strut bar and some koni yellows to go with the springs. if i dont like them (espilers) which chances are everyone does(like them) so i wont but if i do i will sell them and get the spoons. so ill see how well i like em and ill post if i dont like them and someone can get first shot at them. thanks for all the help and goin on what yall say with this order normally honestly i buy spoon or mugen parts but i saw all the post on here and s2ki about how much everyone loved them so im goin with my fellow s2k drivers on this one. thanks

 

don't be disapointed when you first put them on.. it's takes a while for them to settle....so wait about a week before you judge them... but my buddy loves his...

 

koni yellows to go with springs??? or just leave the springs on the stock shocks for a while?? also is anyone running cusco sway bars and if so are they worth the money??? appreciate the help as always

 

my buddy has his espilers without konis for about 5 months and it's still fine...you'll only need konis if you want to fine tune it...but then again eventually your stock suspension will be dead so you'll have to get a new set.. which is when you should upgrade to konis..

and as for the cusco sway bars.. i've heard a couple of good things about it on s2ki... lots of people have been talking about them lately.... so go there and check it out..

 

 

appreciate all the help your given ap2 for some reason i cant get the pics it just keeps throwin a red x in the box but yea im tryin to decide which ones to go with the cusco or mugen or spoon sway bars. i know ima get the jays racing upper shock brace or strut bar as they have it put on the website but just lookin for the best sway bars appreciate all the help

 

the Espelir are on sale @ evasivemotorsports.com for $196

 

im running kg/mm race and koni yellows....i am 100% satisfied.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Razor &raquo;</TD></TR><TR><TD CLASS="quote">im running kg/mm race and koni yellows....i am 100% satisfied.</TD></TR></TABLE>
i too am runnin the same, ive been runing them for a while now.
ill let you be the judge if there hot or not.

 

i think JdmLude04 would listen to me now

 

my god! your car is lookin awesome! drop is clean car is clean and its killin mine! only real appearance mod i have done for the time being is the jdm side markers after i completely finish my suspension still have js racing upper strut as they have it and sways to go and koni's then i get to start on the outside as far as the motor goes not doin much but a spugen titanium single exhaust ( 16 pounds) complete catback free up some weight and i think they look great then its time to start saving for the supercharger but god that drop is clean and the car looks great

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JdmLude04 &raquo;</TD></TR><TR><TD CLASS="quote">my god! your car is lookin awesome! drop is clean car is clean and its killin mine! only real appearance mod i have done for the time being is the jdm side markers after i completely finish my suspension still have js racing upper strut as they have it and sways to go and koni's then i get to start on the outside as far as the motor goes not doin much but a spugen titanium single exhaust ( 16 pounds) complete catback free up some weight and i think they look great then its time to start saving for the supercharger but god that drop is clean and the car looks great </TD></TR></TABLE>

thanks, ya im planning to go with a single exhaust by spugen, but im not sure if i want the oval or something esle. do any of you have sound clips besides the one on the spugen website? for the kgmm, the front is on the koni lower perch and the rear is on the top perch.



but the ride is great, the drop is perfect, its a finger gap all around. i dont rub, although i need to fix my camber.

heres what the koni's come with,

 

just heard the ones on the website i dont know of any others . how much ground clearance do you have with your current set up for everyday driving i mean your not scrapping everytime are you reason i ask is cause i want to get an oem lip but i dont want to rip it off .

 

Define "best" JDMLUDE...or "guy that has started 400 threads in the S2k forum". How can we tell you what is "best" if we have no idea what you are looking for?

 

best normally means superior to the rest . and as far as the threads comment you can post too buddy so dont flame.

 

"best quality" = Eibach



Compare the warranties.

Ryan

 

If it were me I would go with the Eibach. Drop is 1" coupled with the Koni, you have yourself a nice track setup. Good luck! As for the sways, I have the Cuzco front and rear, 3 pc under body brace, lower V brace and 5 point half cage with harness bar. Car is stiff as a rock and handles like a dream. Just rough on everyday driving though...

Duc

 

Pictures should be up again pretty soon. S2ki data base is down at the moment.