what is the stock cc's of the b16 fuel injectors?
and what is a good size to go with with a naturally aspirated motor?
310?

 

Just about every MPFI Honda I know of comes with 240cc injectors. Yeah 310 should be fine, but not really necessary unless you have big cams, hi-compression, ect. On a fairly stock motor not necessary.

 

ya i plan on getting cams and a 35 shot so....


BUSH HELL YEA

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by honda90si &raquo;</TD></TR><TR><TD CLASS="quote">ya i plan on getting cams and a 35 shot so....


BUSH HELL YEA</TD></TR></TABLE>

Don't know too much about nitrous myself, so I don't know what to tell ya as far as that goes. I would assume with only a 35 shot you should be ok with 310cc. I do know that you should make sure you tune that thing well, before you start hammering on the nitrous. Nitrous isn't really my brand of vodka I'm an NA man myself, but hey you like Bush so you can't be all that bad.

 

why only a 35 shot? heyyyyy i thought you said NA?

 

stock injectors should be fine

with bigger injectors and without a proper way to control them, your idle will be very rich.