Looking to see what u guys would recomend for lowering springs. I have a 95 CX, Im on a budget so I'm looking at the "best bang for the buck". I want about a 2.25-2.5 drop ( yea i know its pretty low, but i think EGs look best slammed) to cover the wheel gap. I want a even drop! not lower in front, higher in back thing. What do u guys think? I had Ground Controls Coilovers on my old GSR and liked them, should I fork out some extra cash and get those, My buddy purchased some neuspeed springs for his teg and its a very nice drop.

P.S. if u have pics of EGs lowered on springs you purchased.. etc etc post them up

 

On my EX-girlfriend's car, I installed a set of PROGRESS lowering springs and they worked great. The ride was as good as stock. Plus they were not too shabby on the price either. I paid around $165 for the set. HMMmmm, I wonder if I could get them back....NAh!! The b***h could keep them...... lol ...j/k.

 

Eibach pro kit

 

you have 2400 posts and you still haven't learned to search yet....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SubTitle &raquo;</TD></TR><TR><TD CLASS="quote">"best bang for the buck". I want about a 2.25-2.5 drop</TD></TR></TABLE>

H&R Race Drop ~ $150.....just about anywhere.

 

Neuspeed Race roughly $130.00 & tehy ride very well. I've had Neuspeeds on my EF & now my EG & I enjoy them quite a bit.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slowdx9585 &raquo;</TD></TR><TR><TD CLASS="quote">you have 2400 posts and you still haven't learned to search yet....</TD></TR></TABLE>
u have 1700 and you're still a dumbass....., keep your lame comments to youself, i asked for advice from honda-tech to see if they had any experience with good springs, dont like what u see go away, simple as that!
anyways back to the topic

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DJ_SaNdOz &raquo;</TD></TR><TR><TD CLASS="quote">Neuspeed Race roughly $130.00 & tehy ride very well. I've had Neuspeeds on my EF & now my EG & I enjoy them quite a bit.</TD></TR></TABLE>


I've got neuspeed race in my eg6 with bilstein shocks and it rides firm, but not hard enough to shake you to bits on long drives. Works pretty well on the track too, IMO it's a good balance for track and daily driving.

 

i am also VERY partial to Neuspeed race if your going to run a spring.... if ur gonn a run coils (sleeve and spring) then oviously Skunk2 or Ground Control...

 

anyone have pics of the neuspeed race springs on a EG with 15's?
where can i get these from?
also whats the drop? 2.25? 2.5? is it a even drop or lower in the front?

 

I had Neuspeed Race Drop on my EG.....talk about body roll.

I loved my H&R's way better. H&R also guarantee's no sag.

Each set of springs I used was also with Tokico blues.

 

When using Neuspeed and H&R springs does the ride bounce at all on stock shocks?

 

whats the drop on the H&Rs?

 

2" in the front and 1.75" in the rears

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CharcoalEGG &raquo;</TD></TR><TR><TD CLASS="quote">2" in the front and 1.75" in the rears </TD></TR></TABLE>
hmm... im wondering if these would look nice, im planning on thrwoing on my old mugens 205/50/15 and want no wheel gap, might be leaning on the neuspeed, where are some online places to find some nice prices, or anyone here on h-t carry them, looking for new ones

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SubTitle &raquo;</TD></TR><TR><TD CLASS="quote">
where are some online places to find some nice prices, or anyone here on h-t carry them, looking for new ones</TD></TR></TABLE>

 

i bought neuspeed off ebay. 2 and 2 1/4 inch drop, and after a month of bumpin around these shitty roads there was hardly wheel gap i dont recommend neuspeed, personally. the ride sucked as well.

 

H&R Race!!!

 

have any daylight pics

 

I'll try to get a shot tomorrow before work.....

 

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eh6 &raquo;</TD></TR><TR><TD CLASS="quote">When using Neuspeed and H&R springs does the ride bounce at all on stock shocks?</TD></TR></TABLE>