what all do i need to get an ls swap going??? i know trans engins shift linkage ecu motor mounts etc. but is that it??? what about axels and other stuff wiring harness??? this is all for my project hatch that i have going. i have a 91 hatch std. modle any help would be appreciated.
thanks

 

I think this is the 2nd most common question asked on here, besides tha B16A installation.

DO A SEARCH!!!!

 

other than doing a long search on just a couple of things i need to know. and also rather going to the classifieds and doing another long search. is there anyone who has an ls for sale? let me know.


Modified by hatch91JDM at 1:05 AM 9/29/2004

 

Since you have the standard hatch (4 speed) you also have the "small" front knuckles. You will need to swap those out to DX/Si knuckles or the 90-91 EX fronts which include the 10.3 brake rotors. This is to accept the 90-93 Teg axles required for this swap. You will also have to do the MPFI conversion on your wiring because you got dual point FI. A 90-91 pr4 ecu plugs right in and will run the B18 great. As stated above, search, this has been covered many times. Hasport has a lot of good info posted.
HTH
chris

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hatch91JDM &raquo;</TD></TR><TR><TD CLASS="quote">other than doing a long search on just a couple of things i need to know. and also rather going to the classifieds and doing another long search. is there anyone who has an ls for sale? let me know.


Modified by hatch91JDM at 1:05 AM 9/29/2004</TD></TR></TABLE>

This is not gonna turn into a WTB ad.