I have an Integra GS-R and recently bought a Revhard kit for an Integra LS. So already I have to ditch the charge piping. Does drag charge piping fit the revhard kit or do I have to stick with the revhard piping?

Second question, and this has been asked a hundred times and I have searched but I don't fully understand the answers...

With the current setup, the person I am buying it from has a little pipe with a filter on the end of it. I have read that the drag intake piping will fit the revhard kit and locate the filter away from the engine. Is that correct?

Anyone have any idea when RevHard plans to come out with their intake piping for the Integra? They won't answer their phone hopefully hard at work on the intake piping for the integra.

Edit: I'mn en hte spealeng be! Translation - I suck at spelling.


Modified by ThePro at 6:14 PM 9/27/2004

 

the intake piping should fit, as long as the turbo inlet is the same diameter. just twist the piping around until it looks right. as for the intercooler piping, you need to get the dimensions of both the revhard and drag intercoolers, then go from there