For Sale Jap Spec First gen b16 head
port + polished at http://www.honda-performance.com
performance valve job
milled very minimum to ensure straightness
hot-tanked and cleaned

I installed a brand new set of ITR Lost motion assemblies, bought direct from acura ( 300 dollar value )

Comes with: complete set of cam caps, cam plates, bolts, hardware, ITR Vtec solenoid Polished valve cover, stock b16 cams

a Brand New Still in BOX complete PORTFLOW dual valve spring/titanium retainer set. ( Paid 360 shipped)

Note: The only thing this head needs is a set of valves, this head was used for 5 dyno runs when i purchased a new header and wanted to see the gains, this motor produced 186.4 whp and 122.6 lbs of torque, stock stroke b16, 84mm pistons pretty much a 1.7L

Im looking for 1150 shipped. for everything. If you add up everything,
figure 1000 for the port + polish, 500 for the head, 300 for the valvetrain kit, 300 for the lmas you'd be well over 2100 dollars after its all said and done, buy a set of stock valves or aftermarkets, lap them, throw them in and call it a day. Machine shops will do it for you for under 100 bucks. Please email me @ towsonb16@hotmail.com or call me @ 410-382-5098 or respond to this. Thanks

 

bump bump

 

nobody wants her?!

 

if your still selling the itr head for $1150 shipped, then i'm welling to buy it. So everythin is included right? dist., intake manifold, throttle body, etc. everything besides valves?? E-mail me back please at j2tham04@yahoo.com!thanks

 

its not an ITR read.

 

bump for the evening.

 

bump again, 1000 shipped who wants it?

 

ok 900 shipped thats low as im going