Only post for sale ad's of RACE PARTS!

NO WTB

DO NOT REPLY TO A POST.....PM the person....Keep this thread free of banter....just FOR SALE Posts

chad
__________________

 

FS: SPA 4 Litre Fire System price is 400.00 firm

system details are here http://www.spatechnique.com/product_...ils.cfm?id=125 system is brand new and has been never been installed in a racecar or any car. it needs to be recertified and it costs 102.00 direct from SPA and can be turned around in 1 day

 

FS: Pair of Eibach ERS springs 2.5x10x400lbs $35 shipped

 

FS...used je 12.5 compression 81mm bore..new hasting rings pins,locks included..250 shipped

 

Name: Darryl
Location: Raleigh/Durham NC
Contact: email me at d_baker3@hotmail.com
Item: shaved ITR brake caliper brackets
Price: $75 shipped (firm)

Up for sale are my ITR brackets that have been milled down (by a machine shop) approximately 3mm. These brackets allow you to install Type R/Accord Wagon/CRV/Prelude Vtec/Viger/Legend brake calipers and redrilled 11.1in rotors (from a 94 Prelude Vtec) to integra knuckles without any problems. Since these were on my car for about 2 years, I would recommend that you replace the pins or at least grease them.

Pictures





If you have any questions, email me at the address above.

 

FS/FT:

(2) Eibach ERS 800.250.0380 springs (8" length, 2.5" diameter, 380 ftlbs) - $50 + shipping
(2) Eibach ERS 700.250.0430 springs (7" length, 2.5" diameter, 430 ftlbs) - $50 + shipping

Both pairs have around 1000 miles on them and are in excellent shape.

 

B18 JDM type R head, shaved 10 thousands, Portflow Match ported and valve job. Made to H2 rules. Also have type R cams if needed and a Hytech b18 header ceramic coated.


Make offer.
benny
froggertv@yahoo.com

 

Have for sale genuine Skunk2 Pro Series Front Camber Kit for 88-91 CRX/Civic. Used for less than 6 months I have original receipt to verify this. This is the best kit available, allows a wide range of precise adjustment and will not slip or hit shock tower. $150 shipped




Also for sale I have 2 black Rota Slipstream wheels off my CRX. Fits any civic/crx/integra. Wheels are 15" diameter, 4x100, +40 offset, 8" width. The tires are almost bald and the wheels will be shipped without tires. Wheels are less than 1 year old, I have original receipt. Wheels are a little dirty but otherwise excellent condition, no curbing or peeling, wheels are not bent or otherwise damaged at all. $200 shipped

 

I have for sale the transmission out of my B18C1 CRX. I originally bought a used USDM ITR transmission with the ATS 4.929 final drive, 3.070 first gear, and KAAZ LSD already installed and swapped the internals into a cable YS1 case. At the same time I replaced the mainshaft and countershaft bearings, differential bearings, 2/3/4 syncros, axle seals, differential shims, countershaft nut, and throw out bearing. I also replaced the 4th and 5th gears with brand new GSR gears from Acura to convert the transmission to the 98+ ITR spec. I have receipts for all the parts I replaced. The transmission shifts perfectly and is the perfect compliment to any N/A build. The transmission only has 6 months on it since the build. This is the third transmission I have built, I spent 3 summers working at a Honda dealership and learned under the guidance of an experienced technician. Everything was done according to the Helms manual. The reason I am selling it is that my new engine dropped a valve and I am out of money for this car so I am parting it out to buy another one. I would much rather hang onto this transmission because I have a ton of time and money tied up in it but I have no choice. Pictures below, I also have a video of me going through the gears with it when my car was still running. $1600 plus shipping.

 

For Sale:

-TEIN Type RA coilovers: 14K/10K rates, 1000miles, mint condition $1000 or
$800 + your mint condition stock ITR shocks/springs (may have aftermarket springs)sorry dirty in pics, currently on car

-MUGEN 26mm rear sway bar: includes bushings/brackets (no endlinks) $350

-CUSCO front + rear upper strut bars: $100 each or $175 both

These came off my 98 Integra R.











Email for fastest reply: Jdmdc2r01@yahoo.com
Paypal accepted but prefer local pickup.
Buyer pays for shipping

 

5 lug kit; Acura Type R uprights, hubs front and rear, rear rotors, two front spindles and one rear. $350 OBO Its gotta go!!!!! Located in Los Angeles, CA Rotors are in great condition, no warping.

Call 818-512-7008 or e-mail: AdelbergK@aol.com

GOTTA SELL THIS STUFF!!!!!!!!!!!

 

FOR SALE - KAAZ 1.5 way Plate LSD for K SERIES

Low mileage and Great shape,just inspected,adjustable from 30-60-100% plate lock.Currently set to 60% and I can provide adjustment as well if needed.Comes with Speedo gear also.

PM me for more if interested

$400 shipped takes it

 

FS: Like new pair of Alpinestars Tech 1-Z gloves. Black/White color, Large. Gloves will come like new in original zip-up packaging.

Worn for two time trials events, they fit a little too snug for me so Im selling these to help pay for the same set in XL.

SOLD!

 

graphite splitters for local IL people

http://www.hondamarketplace.com/show....php?t=2837916

 

.B series dry sump kit forsale 650 shipped also plx wide band kit never been used with leaded 160.obo shipped

 

Complete with helmet hardware, case, styrofoam in case, instructions, stickers, neck restraint. (no baseball cap)

$400 + shipping FIRM

 

Have front and rear PCI towhooks red never used or installed.

Will sell for 60 shipped.
http://passwordjdm.com/PCI-Race-Spec...P3711C286.aspx

 

I've modified prices on these items in this thread - pics are there to.

http://www.hondamarketplace.com/show....php?t=2816680

 

Email will get the fastest reply.
Jaredreyes83@gmail.com


Hondata S200, fully loaded with OBD1 pr3 ecu comes with LED shift light, ebrake switch, wire for set button. (button is gone) everything is installed and ready to go.

the ecu currently has a katman / FF- squad chip.
$250 for everything shipped

 

chad you can delete this post if you would like but it has to be done.

I WOULD LIKE TO POST MY EXPERIENCE WITH ATMOSFEAR/HARLEY. now you are expecting bad news..negative. I SAW THESE GLOVES FOR SALE WHEN THEY WERE FIRST POSTED. I DIDNT REALLY NEED THEM BUT THEY HAD BEEN THE GLOVES I HAD ALWAYS WANTED. SO I LET IT RIDE FOR A BIT AND I SAW THEY WERENT MOVING. SOOOO I SHOT HIM A LOWBALLER OFFER TO SEE WHERE IT WOULD GO. WE MET IN AT A PRICE AND DIDNT TALKING SHIPPING. I JUST EXPECTED THE SLOWEST WAY POSSIBLE WHICH WAS NO BIG DEAL. I THINK I PAID FOR THESE LATE WEDNESDAY NIGHT. HE SENT ME THE TRACKING THURSDAY NIGHT AND IT SAID THE EXPECTED SHIP DATE WAS TODAY FRIDAY. HERE IS THE CATCH..I LIVE IN THE MIDWEST AND HE IS FROM THE PACIFIC COAST. HE USED MONEY THAT HE COULD HAVE POCKETED TO GET THEM TO ME FASTER. I AM ABSOLUTELY AMAZED. GREAT SELLER..PROBABLY THE BEST SELLER I HAVE EVER BOUGHT FROM ESPECIALLY ON HERE. x a ton.

 

Thanks again for the kind words Brad, I sincerely appreciate it.

-Harley

 

for the both of you. good to hear this kind of thing instead of the usual scamming WOO

 

650 lb Eibach ERS
2.5 inch ID / 8 inch length
0800.250.0650

$70. Shipped

Email: fasthonda@msn.com

 

FS: PIC Performance 10/12k APEX coilovers approx 3k miles. Asking $650. Lower control arms (non-spherical bushing) also available.

 

PMED