Honda-Tech - Honda Forum Discussion

Skunk2 Pro1 Cams + Boost - What spring to use?

Thread Tools
 
Search this Thread
 
Old Apr 14, 2018 | 08:23 PM
Share
  #26  
TheShodan's Avatar
TheShodan
Moderator
20 Year Member
iTrader: (14)
 
Joined: Jan 2002
Posts: 24,555
Likes: 241
From: City of Wind, IL, USA
Default Re: Skunk2 Pro1 Cams + Boost - What spring to use?
Originally Posted by Balor_Gr
Pfff ill research about it more for a moment i was happy 80lbd ferrea will handle pro1..
Web street/strip is supposed to be ok with 80lbs till 25 psi..
Again, boost pressure is irrelevant in this regard. I'll keep saying it.. and saying it, and saying it.
Reply
0
Old Apr 16, 2018 | 10:07 AM
Share
  #27  
Balor_Gr's Avatar
Balor_Gr
Honda-Tech Member
 
Joined: Sep 2012
Posts: 1,051
Likes: 26
From: Greece
Default Re: Skunk2 Pro1 Cams + Boost - What spring to use?



Is it this the visual behind the problem?
Reply
0
Old Apr 21, 2018 | 06:42 PM
Share
  #28  
supersilverdc2's Avatar
supersilverdc2
Honda-Tech Member
 
Joined: May 2013
Posts: 412
Likes: 0
From: NoRcAl
Default Re: Skunk2 Pro1 Cams + Boost - What spring to use?
I use supertechs 85lb dual springs on my gsr head with skunk2 pro1s
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
4port WG spring sizing?
Pumpking.
Drag Racing
29
Nov 2, 2016 09:35 AM
BC valvetrain and Skunk2 Pro1 cams
Cho0se
All Motor / Naturally Aspirated
22
May 16, 2013 07:24 AM
its safe use Pro3 Cams with Skunk Tuner valvel spring
mercenary
All Motor / Naturally Aspirated
6
Apr 11, 2010 06:25 PM
skunk2 stage2 cams with 70lb or 85lb supertech valve spring rate
HondaGuy02
Tech / Misc
1
Sep 14, 2008 08:27 PM
Skunk2 Progressive Spring
LBBP R
Tech / Misc
1
Dec 29, 2004 09:34 PM
Back to Subforum
Forced Induction
View Next Unread
Cam alignment - B18c bottom, B16 head, GSR cams




Advanced Search

All times are GMT -8. The time now is 01:09 AM.