When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Re: ** The offical 96-00 civic 4dr thread ** PART 3
I've collected the upper grey parts. I need to go back and get the visors. I'll be getting the headliner re-done in dark grey or light grey depending on if they can match the light grey.
Got the b18c5 swapped into my cousins hatchback and shift linkage done.
Re: ** The offical 96-00 civic 4dr thread ** PART 3
Originally Posted by tony_2018
Gotta look carefully, the handy stitch work.
That OEM Honda stitch work... It came out of a civic gx, which has a few unique parts in the backseat. Not entirely sure why you have such a stick with up your *** about a seat cushion.
Re: ** The offical 96-00 civic 4dr thread ** PART 3
Originally Posted by spAdam
About to try and unload some parts here, thought I'd give you sedan guys first go at it though. Since I ended up going a different route than I originally intended, I have a few extra parts. PM for prices.
Civic/Integra non Type R REAR calipers. All clips and brackets present. They were degreased & disassembled, bodies soda blasted and bores honed. Painted & baked with VHT, then rebuilt with Honda OE kits. I have the ebrake cable arms & brackets also, I need to clean those up and they'll be included.
Fastbrakes drum to 11" rear conversion for "EK" Civics. I mounted one bracket and rotor for mockup, so it has a couple of marks on it (you can see if you zoom in on the picture). Otherwise the whole kit hasn't even been taken out of the box:
Re: ** The offical 96-00 civic 4dr thread ** PART 3
Originally Posted by spAdam
About to try and unload some parts here, thought I'd give you sedan guys first go at it though. Since I ended up going a different route than I originally intended, I have a few extra parts. PM for prices.
Civic/Integra non Type R REAR calipers. All clips and brackets present. They were degreased & disassembled, bodies soda blasted and bores honed. Painted & baked with VHT, then rebuilt with Honda OE kits. I have the ebrake cable arms & brackets also, I need to clean those up and they'll be included.
Fastbrakes drum to 11" rear conversion for "EK" Civics. I mounted one bracket and rotor for mockup, so it has a couple of marks on it (you can see if you zoom in on the picture). Otherwise the whole kit hasn't even been taken out of the box:
Re: ** The offical 96-00 civic 4dr thread ** PART 3
Originally Posted by 1997
That OEM Honda stitch work... It came out of a civic gx, which has a few unique parts in the backseat. Not entirely sure why you have such a stick with up your *** about a seat cushion.
Interesting, I stand corrected. I'll admit that's the one trim level I never saw in person.
Originally Posted by hifl
Those rear are the size of my front.
They are a nice bump in torque if you have a large front setup, works out to be about the same as 10.2 rears with ITR sized calipers.
Re: ** The offical 96-00 civic 4dr thread ** PART 3
Originally Posted by spAdam
Nice... Leather inserts?
This finally happened over the weekend. Surprised it actually made it 264000 miles... I must not open the hood enough
Interior came from the canadian model, the acura something something. dark grey interior with leather inserts and dark grey interior pieces. I went to the junkyard and got the light grey upper interior (pieces from the shoulder and up), the headliner will be black but the visor, visor clips and domelight will be light grey. I think there are 2 tabs I need to dig up too. Carpet will be black. Seats will be the FA5 SI. Front 1st as the rear I need to do some modifications to get it to fit.
Re: ** The offical 96-00 civic 4dr thread ** PART 3
Originally Posted by spAdam
Nice... Leather inserts?
This finally happened over the weekend. Surprised it actually made it 264000 miles... I must not open the hood enough
thats really good for 260k miles lol
im at 194k on my grey 4dr and i keep reminding myself to pull straight back and not up at an angle everytime i pop my hood lol
If u dont wana deal with having to replace d entire cable, some small company sells replacement pull thingys.
its a knurled **** with a set screw. I cant remember off the top of my head.
Re: ** The offical 96-00 civic 4dr thread ** PART 3
I actually sold it all and shipped out on Saturday. Sorry bud.
I was thinking I might poke around on McMaster and see what I could find, but I'll look into the pull you mentioned too. Thanks. The death blow was probably exactly from not pulling straight, I had reached in through the window to pop it that time.
Re: ** The offical 96-00 civic 4dr thread ** PART 3
Originally Posted by tony_2018
Interior came from the canadian model, the acura something something. dark grey interior with leather inserts and dark grey interior pieces. I went to the junkyard and got the light grey upper interior (pieces from the shoulder and up), the headliner will be black but the visor, visor clips and domelight will be light grey. I think there are 2 tabs I need to dig up too. Carpet will be black. Seats will be the FA5 SI. Front 1st as the rear I need to do some modifications to get it to fit.
Re: ** The offical 96-00 civic 4dr thread ** PART 3
Originally Posted by Cobb2819
Acura EL Premium i believe is the car.
Thats the one. Here's a pic of the rear in place. Seat bellts are dark grey too. upper panels are light grey. dog got scare shitless in the garage and knock my roof panel over. Looks bad...
Re: ** The offical 96-00 civic 4dr thread ** PART 3
