torque specs d16z6 specs and pattern

I am lost... don't know how to torque my head... what is the sequence and what are the torque steps...
Thanks Mike... first time out...

 

Apply CLEAN oil on the bolt threads and washer contact surface.


First Step - 30 Nm (22 lb-ft)
Second Step - 73 Nm (53 lb-ft)

 

Seems like for the Y7 and Y8 engines they broke the torque sequence into three steps and added a fourth to double check 1 and 2. So, if you want to lower the first step to 14 lb-ft and add a middle step to 36 ft-lb, that should work, too.

The info I provided in the first response was from the service manual but, maybe there's a service bulletin that recommends doing the 5th gen engines in three steps?